Samsung Dishwasher Error Code FC2

FC2 means the hot air drying fan motor has failed to maintain at least 2000 RPM after startup. The dishwasher attempts to restart the fan up to 6 times before locking in the fault. This prevents the drying cycle from completing, which leaves dishes wet at the end of the wash.

Resetting the dishwasher may temporarily clear the FC2 code, but the error will return if the underlying cause is not addressed. Because the control board only sets the fault after 6 or more failed restart attempts, the problem is persistent and not a random glitch. A reset is useful for confirming the fault is repeatable, but it is not a fix.

If a foreign object is blocking the impeller and can be cleared without parts, the repair cost is minimal. If the drying fan motor needs replacement, expect parts and labor costs to range from roughly $100 to $250 depending on your location and the service provider. A control board replacement, if needed, would typically cost more.

In some cases, yes. The first step is to check the drying fan impeller for any foreign objects that may be physically blocking it, which is something most homeowners can do without special tools. If the blockage is cleared and the error returns, the repair becomes more involved and may require testing or replacing the fan motor and its wiring, which is better suited to a technician.

The washing and rinsing functions may still operate, but the drying cycle will not complete properly. Running the dishwasher repeatedly with a jammed or failed fan motor is not recommended, as continued operation could put additional strain on related components. Addressing the fault before regular use is the safer approach.