mypros+
Error code reference

Samsung Hood Error Code E-08

MWO function starts with spit inserted into cavity.

Samsung codesSamsung hood codes

MWO function starts with spit inserted into cavity.

MyPros+ Max

Get the full diagnostic procedure for E-08.

  • Step-by-step tests with expected resistance, voltage, and continuity values
  • Wiring diagram references and connector pinouts from the OEM service manual
  • Verified part numbers when replacement is required
Get the full procedure

$29/month · Cancel anytime · Or $9.95 3-day pass

What E-08 means on a Samsung hood

The E-08 error code on a Samsung hood indicates that the microwave oven (MWO) function has been initiated while a spit or rotisserie accessory is inserted into the cavity. This is a safety interlock condition, not a component failure. The control board detects the presence of the spit through a cavity sensor or mechanical detection switch and halts or flags the microwave cooking function to prevent arcing, damage to the magnetron, or a fire hazard caused by metallic accessories being present during microwave operation.

The spit is a metal rotisserie rod designed for use with convection or grill cooking modes on combination hood-oven or over-the-range units with multi-function cooking capabilities. Because metal components inside a microwave cavity can cause severe arcing and damage to internal components including the magnetron, waveguide cover, and cavity walls, the unit is programmed to prevent microwave operation when such accessories are detected or left in place.

This error is typically resolved by removing the spit or rotisserie accessory from the cavity before selecting the microwave cooking function. Once the accessory is removed and the cavity is cleared, the error should clear automatically when the appropriate mode is reselected. If the error persists after the spit has been removed, the cavity detection switch or sensor may be faulty, stuck, or misaligned, requiring physical inspection of that component.

Source: manufacturer service documentation.

Common causes of E-08

  1. 01

    Spit or rotisserie accessory left in cavity

    Wiring / connection

    The most frequent cause is simply that the metal spit was not removed before switching to microwave mode. Remove the accessory from the cavity and reselect the cooking function.

  2. 02

    Cavity detection switch stuck in triggered position

    Part replacement

    If the spit has been removed but the error persists, the detection switch that senses the accessory may be stuck or jammed in the closed position. Inspect the switch for debris or physical damage.

  3. 03

    Faulty cavity sensor or detection switch

    Part replacement

    A defective sensor or switch may incorrectly signal that the spit is present even when the cavity is empty. This requires testing the switch for proper continuity and operation.

  4. 04

    Control board misreading sensor input

    Part replacement

    In rare cases, the main control board may be incorrectly interpreting the signal from the cavity detection switch, triggering the E-08 condition without an actual accessory present.

See the test procedure for each cause

Frequently asked questions about E-08

What does E-08 mean on a Samsung hood?
E-08 on a Samsung hood means the microwave function was started while a spit or rotisserie accessory was detected inside the cooking cavity. This is a safety interlock that prevents the microwave from operating with metal accessories present. It is not a malfunction of the unit itself in most cases. Removing the spit from the cavity should resolve the error.
How do I fix the E-08 error on my Samsung hood?
Open the cooking cavity and remove the rotisserie spit or any metal accessory that may be inside. Once the cavity is clear, reselect your desired cooking mode. If the error continues to appear after removing the spit, inspect the cavity detection switch for debris, damage, or a stuck position, as that component may need replacement.
Is the E-08 error on a Samsung hood a safety hazard?
The E-08 code itself is a safety protection feature, not a hazard. It exists to prevent microwave operation while a metal spit is inside the cavity, which could cause arcing, fire, or damage to the magnetron. As long as the unit is blocking microwave function as intended, the system is working correctly. Do not attempt to bypass this interlock.
Will resetting my Samsung hood clear the E-08 error?
A power reset alone is unlikely to permanently clear E-08 if the spit is still in the cavity or if the detection switch is faulty, because the unit will re-detect the condition when operation is attempted again. The correct fix is to remove the spit first. If the switch itself is defective, a reset will not resolve the underlying issue and the error will return.
How much does it cost to repair a Samsung hood showing E-08?
If the fix is simply removing the spit, there is no repair cost at all. If a cavity detection switch needs replacement, parts and labor costs typically range from $75 to $200 depending on your location and service provider. A control board replacement, if needed, would generally fall in a higher range of $150 to $350 or more including parts and labor.

Related Samsung hood codes

All Samsung hood codes
View all 37 Samsung hood codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass