mypros+
Error code reference

Samsung Refrigerator Error Code 41Er

MAIN PCB to Panel PCB communication error (MICOM to MAIN PANEL communication error).

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 41Er error code actually means

The 41Er code means your refrigerator's two main control boards have lost the ability to talk to each other. This can happen because of a loose wire connection between the boards or because one of the boards has failed. A technician will need to inspect the wiring first and then replace any faulty boards if the wiring looks fine.

Diagnostic procedure

The full 41Er procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check cable connections between Main and Panel PCB; if no cable problem found, replace Main and Panel PCB.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 41Er procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 41Er

Ranked by how often they cause this code
  1. 1Loose or disconnected wiring harness
  2. 2Damaged or pinched wiring
  3. 3Corroded or contaminated connector terminals
  4. 4Failed Panel PCB
  5. 5Failed Main PCB

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 41Er

What does 41Er mean on a Samsung refrigerator?
The 41Er code indicates a communication error between the Main PCB and the Panel PCB inside the refrigerator. These two control boards need to exchange signals continuously, and when that link fails the refrigerator logs this fault. The problem can be caused by loose wiring or a failed control board. A technician should inspect the cable connections first before replacing any parts.
Will resetting my Samsung refrigerator clear the 41Er code?
A power reset by unplugging the refrigerator for several minutes may temporarily clear the display, but the code will return if the underlying communication fault has not been corrected. A reset does not repair loose connectors, damaged wiring, or faulty boards. It can be useful as a first step to confirm whether the issue is intermittent, but a physical inspection of the wiring is still needed.
How much does it cost to repair the 41Er error on a Samsung refrigerator?
If only a wiring harness reconnection is needed, costs are limited to a service call fee, typically in the range of $75 to $150. If a Panel PCB replacement is required, parts plus labor can run from $150 to $350 depending on the model. If the Main PCB also needs to be replaced, total repair costs can rise to the $250 to $500 range or higher. Getting a diagnostic estimate before authorizing any board replacements is advisable.
Can I fix the 41Er error myself?
A homeowner comfortable with basic appliance repair can start by unplugging the refrigerator, locating the wiring harness between the two control boards, and firmly reseating all connectors. If the error returns after reconnecting power, the repair moves into board replacement territory, which requires sourcing the correct parts and some comfort working with electronics. If you are not confident working with control boards, a qualified technician is recommended.
Is it safe to keep using my refrigerator while the 41Er code is showing?
A communication error between control boards can affect how well the refrigerator manages temperature and responds to your settings, which may compromise food safety over time. It is best to address the fault promptly rather than continuing to rely on the unit. Monitor internal temperatures closely with a separate thermometer if you need to keep using the refrigerator while waiting for repair.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass