mypros+
Error code reference

Samsung Refrigerator Error Code 50E

Auto Fill infuser overflow error

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 50E error code actually means

Your Samsung refrigerator's 50E error means the automatic water fill system has detected water overflowing where it should not be. The refrigerator has stopped the fill process to prevent water damage. This could be a real overflow or a faulty sensor giving a false reading.

Diagnostic procedure

The full 50E procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Check voltage of MAIN PCB CN90-11 ↔ CN90-13; 0V~4.5V indicates overflow, 4.5V~5V is normal.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 50E procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 50E

Ranked by how often they cause this code
  1. 1Faulty or stuck water inlet valve
  2. 2Defective overflow sensor
  3. 3Wiring fault between sensor and main PCB
  4. 4Blocked infuser drain or tray
  5. 5Main PCB failure

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 50E

What does 50E mean on a Samsung refrigerator?
The 50E error code indicates that the Auto Fill infuser system has detected a water overflow condition. The main PCB monitors voltage at connector CN90 pins 11 and 13, and a reading between 0V and 4.5V triggers this error. Normal operation registers between 4.5V and 5V at that connector. The refrigerator halts the auto fill process when this fault is active to prevent water damage.
Is the 50E error dangerous or will it damage my refrigerator?
The 50E error is designed as a protective fault. When triggered, the refrigerator stops the auto fill process to prevent water from continuing to overflow into areas that could cause further damage. However, if there is an actual overflow present, leaving it unaddressed can lead to water pooling inside the unit, potential damage to electronics, or mold growth. Address the error promptly rather than repeatedly resetting it.
How much does it cost to repair a Samsung refrigerator showing the 50E error?
Repair costs depend on which component has failed. A water inlet valve typically costs between $30 and $80 for the part, while an overflow sensor replacement is usually in the $20 to $60 range. If the main PCB requires replacement, costs can range from $150 to $350 or more for the part alone. Adding professional labor will increase the total, generally ranging from $100 to $200 depending on your area and the complexity of the repair.
Can I fix the 50E error myself?
Some causes of the 50E error are DIY-friendly. Start by checking the infuser tray and surrounding area for standing water, and clean any debris or mineral buildup from the drain path. Inspect the wiring harness at connector CN90 for loose or corroded pins. If the tray is dry and the wiring looks intact, diagnosing the sensor or inlet valve will require a multimeter and some comfort working around appliance components.
Will resetting the refrigerator clear the 50E error?
A power reset may temporarily clear the 50E code, but it will return if the underlying cause is not corrected. If the overflow sensor is detecting a real overflow condition or is faulty, the error will reappear as soon as the auto fill system attempts to operate. A reset alone is not a fix and should only be used as part of a diagnostic process.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass