Samsung Refrigerator Error Code Comp Abnormal current

This error means the refrigerator's control board has detected that the compressor is drawing current outside its normal operating range. It can be triggered by a wiring issue, a faulty current sensing component such as resistor R308, or a problem with the compressor itself. The fault is designed to protect the system from damage caused by electrical irregularities.

Continued operation is not recommended while this fault is active. An abnormal current condition at the compressor can indicate an overloaded or failing motor, which poses a risk of further component damage or, in rare cases, an electrical hazard. It is best to address the fault promptly and avoid relying on the refrigerator to maintain safe food temperatures until the issue is resolved.

Repair costs vary widely depending on the root cause. Fixing a loose connection or replacing a small resistor like R308 would be at the lower end of the cost range, potentially between $75 and $200 including a service call. Replacing a failed compressor is significantly more expensive, often ranging from $300 to $700 or more depending on the model and labor rates in your area.

Some basic steps are within reach of a knowledgeable DIYer, such as inspecting and reseating the compressor's wiring connections. However, testing R308's resistance at 0.09 ohms requires a precision multimeter, and diagnosing the compressor's windings or the sealed refrigeration cycle typically requires professional tools and expertise. If connections appear intact, calling a technician is the recommended next step.

A reset may temporarily clear the error code, but it will return if the underlying problem is not corrected. Simply power-cycling the unit does not repair a faulty resistor, damaged wiring, or a failing compressor. The reset can be useful for confirming whether the fault is intermittent or persistent, but it should not be treated as a fix.