Samsung Refrigerator Error Code F-10 (Ice Room FAN)

The F-10 code indicates the refrigerator has detected a fault with the ice room inner fan motor circuit. This can be caused by a broken feedback signal line, a separated motor wiring harness, or a failed fan motor. The control board monitors voltage at connector CN76 and triggers this code when the feedback signal from the fan is missing or abnormal. Ice production will typically stop while this fault is active.

The refrigerator's main fresh food and freezer sections will likely continue operating, but the ice maker system will be compromised. It is not a safety hazard in the traditional sense, but continued operation without addressing the fault can stress other components in the ice room. You should avoid relying on ice production and address the repair promptly.

A power reset may temporarily clear the F-10 code, but the error will return if the underlying fault is not repaired. The control board re-evaluates the ice room fan feedback signal each time the fan is commanded to run, so any physical problem with the wiring or motor will trigger the code again. A reset is useful for confirming whether the fault is intermittent, but it is not a repair.

Some causes of the F-10 code are DIY-friendly, particularly checking and reseating the wiring connector at CN76 or clearing a frost blockage from the ice room fan. If the fault is a failed fan motor, the part is generally accessible and replaceable with basic tools. However, if the voltage at CN76 is outside the 6V to 12V range and wiring checks out, the main PCB may need professional evaluation.

If the fix is simply reseating a connector or defrosting the ice room, there may be no parts cost at all. Replacing an ice room fan motor typically runs in the range of $30 to $80 for the part, plus labor if a technician is involved. If the main PCB is at fault, costs can range from $150 to $350 or more depending on the model and service rates in your area.