mypros+
Error code reference

Samsung Refrigerator Error Code FF 1

Forced Operation 1 mode active

Samsung codesSamsung refrigerator codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the FF 1 error code actually means

FF 1 is not an error or a problem with your refrigerator. It means the refrigerator has been put into a special test mode where the compressor runs at full speed, which is used by repair technicians to check how the unit is working. You can exit this mode by pressing the same buttons that turned it on, or by unplugging the refrigerator and plugging it back in.

Diagnostic procedure

The full FF 1 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock FF 1 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of FF 1

Ranked by how often they cause this code
  1. 1Accidental button combination press
  2. 2Intentional technician diagnostic test
  3. 3Control board retention of test mode state

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about FF 1

What does FF 1 mean on a Samsung refrigerator?
FF 1 indicates that Forced Operation Mode 1 is active on your Samsung refrigerator. In this mode, the compressor is running at a fixed speed of 3600 RPM as part of a diagnostic test sequence. This is not a fault code and does not indicate a malfunction. The display will show FF 1 until the mode is exited.
Is my Samsung refrigerator safe to use when FF 1 is displayed?
Yes, the refrigerator is safe to use while FF 1 is displayed. The compressor is actively running at 3600 RPM, which means the unit is cooling. Food safety is not compromised during this mode, though it is best to exit the test mode so the refrigerator returns to its normal, energy-efficient automatic operation.
Does the FF 1 code on a Samsung refrigerator mean I need to replace a part?
No, the FF 1 code does not indicate a failed or failing component. It is a test mode status indicator, not a fault condition. No parts replacement is required to resolve this code. If you see this code repeatedly appearing on its own without any button presses, inspecting the control board for unusual behavior would be the appropriate next step.
How do I fix the FF 1 code on my Samsung refrigerator?
Because FF 1 is a test mode indicator and not a fault, no repair is needed. You can exit the mode by pressing the same button combination that activated it, or by unplugging the refrigerator for several minutes and then plugging it back in. Normal automatic operation will resume once the mode is cleared.
Will resetting my Samsung refrigerator clear the FF 1 code?
A power cycle reset will typically clear the FF 1 code. Unplug the refrigerator from the wall outlet, wait at least five minutes, and then plug it back in. If the code reappears after the reset, the button sequence may be getting triggered again, or the control board may need inspection.

Related Samsung refrigerator error codes

All Samsung refrigerator codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass