Samsung Refrigerator Error Code Fridge High Temperature Error

This error means the fresh food compartment has reached an abnormally high temperature, and the display indicator will blink to alert you. The refrigerator's control system detected that the internal temperature climbed beyond its acceptable operating range. It is often caused by a door being left open or hot food being stored inside, and it will typically clear on its own once the compartment cools back down.

Food safety depends on how long the compartment has been at an elevated temperature. Perishable foods like meat, dairy, and leftovers can enter the danger zone if the temperature has been above 40 degrees Fahrenheit for more than two hours. If the error was caused by a brief door opening or a small amount of warm food, the risk is low. When in doubt, check food temperatures directly and discard anything that may have been unsafe for too long.

If the error is caused by a door left open or hot food storage, there is no repair cost at all since no parts are needed. If a door gasket needs replacement, parts and labor typically range from $50 to $150 depending on the model. A failed evaporator fan motor or faulty temperature sensor repair can range from $100 to $300 or more when accounting for parts and professional labor.

Start by checking whether the door was left open or whether warm food was recently placed inside, as these are the most common causes. Make sure the door is fully closed, that the door gasket is sealing properly, and that airflow inside the compartment is not blocked. If the error persists after the fridge has had time to cool down, inspect the evaporator fan and door seals for damage, or consider having the temperature sensor tested.

The error is designed to auto-clear on its own once the compartment temperature returns to a normal range, without requiring a manual reset. Simply removing the cause, such as closing the door or waiting for hot food to cool, should allow the error to resolve after a pre-determined period. If you want to attempt a manual reset, unplugging the refrigerator for a few minutes can clear the display, but the error will return if the underlying cause has not been addressed.