Samsung Refrigerator Error Code ICE-MAKER (FRIDGE)-FUNCTION ERROR

This error means the refrigerator's control board has detected an open circuit or fault condition in the Ice Pipe Heater, which is the heating element that prevents the ice supply tube from freezing solid. The fault can be caused by heater housing separation, a loose or corroded connector, a broken wire, or a failed heater element. Ice maker operation is typically suspended when this error is active.

A power reset alone will not permanently clear this error if the underlying fault is still present. Unplugging the refrigerator and plugging it back in is part of the verification process after a repair, not a fix by itself. The error will return if the heater circuit remains open or shorted.

Repair costs vary depending on the specific cause. If only a connector needs to be re-seated or a wire repaired, labor costs alone may apply, typically in the range of $75 to $150 for a service call. If the ice maker assembly requires full replacement, parts plus labor can range from $150 to $400 or more depending on the model and local labor rates.

Some causes, such as a disconnected or poorly seated connector, can be addressed without special tools by inspecting and re-seating the wiring harness at the ice maker. However, if the Ice Pipe Heater element itself has failed or the housing has separated internally, replacing the ice maker assembly is required. After any repair, the refrigerator should be unplugged and then plugged back in so the control board can re-check the heater circuit.

The refrigerator's cooling and food storage functions are generally not directly affected by this error, but ice production will likely be impaired or stopped. It is best to address the fault promptly, as a non-functioning Ice Pipe Heater can cause ice to bridge and block the ice supply tube, potentially leading to additional problems with the ice maker system.