Samsung Refrigerator Error Code Ice Maker(FF) Function Error

This error means the refrigerator's control board has detected an open circuit error in the ice pipe heater within the ice maker assembly. The heater is used during the ice harvest cycle to release ice from the tray. The error is triggered by a separated heater housing, a loose or broken connector, a disconnected wire, or a short circuit in the heater. The ice maker will not function correctly until the fault is resolved.

A knowledgeable DIYer can attempt some of the simpler fixes, such as reseating a loose wiring connector or checking that the heater housing is properly secured. However, if the heater element itself has failed or wiring is damaged, replacing the Ice Maker(R) assembly is the recommended repair and requires comfort working with refrigerator disassembly and electrical components. If you are unsure, a qualified appliance technician should perform the repair.

Repair costs vary depending on the specific cause. If the fix is simply reseating a connector, there may be no parts cost at all, though a service call fee typically ranges from $75 to $150. If the full ice maker assembly requires replacement, parts alone can range from $100 to $250 or more depending on the model, with total repair costs including labor often falling between $200 and $400. Getting a diagnosis first helps avoid unnecessary parts replacement.

A power reset alone will not permanently clear this error if an underlying hardware fault exists. The error is tied to a detected open circuit in the heater, so it will return after a reset unless the cause, such as a loose connector, separated housing, or failed heater, has been physically corrected. After making repairs, plug the refrigerator back in to confirm the error does not reappear.

This error is not an immediate safety hazard to your household, but a short circuit in the heater wiring should not be ignored. A damaged or shorted wire can pose a risk if left unaddressed over time. The refrigerator and freezer compartments will continue operating normally, but ice production will be affected. Addressing the error promptly prevents further potential damage to the ice maker or its wiring.