Samsung Refrigerator Error Code R-1 (Ice Maker Error)

The R-1 error means the ice maker completed more than three harvest cycles in a row while the ice level sensor continued to report an error, indicating ice production was not being detected correctly. The refrigerator triggers this code to flag a failure in the ice making kit or its associated level sensing system. Normal ice production will be suspended until the issue is resolved.

A power reset may temporarily clear the error code from the display, but the R-1 code will return if the underlying problem with the ice maker or level sensor has not been corrected. The reset does not repair any faulty components. Address the root cause first, then power the unit back on to verify the error is resolved.

If the repair requires replacing the ice maker assembly, parts typically range from $75 to $200 depending on the specific Samsung model, with professional labor adding $100 to $250 on top of that. If the issue is a simple blockage or a loose connector, the repair may cost nothing beyond your time. Getting a diagnostic visit from a technician before ordering parts can help confirm the correct component needs to be replaced.

Start by inspecting the ice bin for blockages or frost buildup around the ice level sensor window and clear any obstructions. Check that the ice bin is properly seated and all wiring connectors to the ice maker are secure. If the error persists after these checks, replacing the ice maker assembly is the recommended repair, followed by powering the refrigerator back on to confirm normal operation.

The R-1 error is specific to the ice maker system and does not affect the refrigerator or freezer cooling functions. Your food will remain safely stored while this error is active. There is no immediate safety hazard, but the ice maker will not produce usable ice until the fault is corrected.