Samsung Refrigerator Error Code rr

The rr code indicates that the fridge compartment has detected an abnormally high internal temperature. It is a thermal warning generated by the refrigerator's control system when the fresh food section rises beyond its acceptable temperature range. The code can result from something as simple as a door left open or from a component failure affecting the cooling system. It will clear on its own after a set period if the temperature returns to normal.

If the code appeared after a door was left open or warm food was loaded, the food is likely safe as long as the temperature recovers quickly and the compartment returns to normal operating range. However, if the rr code persists and the compartment remains warm for several hours, perishable food may be at risk and you should address the issue promptly or transfer food to a cooler. A continuously elevated fridge temperature is not safe for food storage.

If the error is caused by a door gasket or user behavior, there may be no repair cost at all. Replacing a door gasket typically falls in the range of $30 to $100 for parts. If a component like an evaporator fan motor or defrost system part has failed, repair costs including parts and labor generally range from $150 to $400 depending on the specific part and your location. A thermistor replacement is usually on the lower end of that range.

Start by checking whether the door was recently left open for an extended time or whether warm food was placed inside, as these are the most common causes. Close the door fully, ensure the door gasket is sealing properly, and allow the refrigerator time to recover. If the code persists after an hour or two of normal closed-door operation, check whether the evaporator fan is running and listen for unusual sounds, as a deeper cooling system issue may need to be diagnosed.

The rr code is designed to clear automatically after a predetermined period once the cause is resolved, so a manual reset is not always necessary. If you want to attempt a reset, unplugging the refrigerator for a few minutes and plugging it back in may clear the display. However, if the underlying condition such as a warm compartment still exists, the code will return. A reset does not fix a mechanical or component issue.