mypros+
Model reference

Amana 11-3C

Air Conditioner

4 documents23 error codes10 service modes

Available documentation

Bulletin

  • ServiceBulletin-TS4482 pg
    Covers this model

Tech Tip

  • Instruction Sheet - 820476112 pg
    Covers this model
  • Instruction Sheet16 pg
    Covers this model
  • Instruction Sheet - 818520212 pg
    Covers this model
MyPros+ Max

Diagnose your Amana 11-3C.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (23)

CodeMeaning
-F2-Keyboard (membrane switch) failure.-F3H-Humidity sensor failure.-F3T-Temperature sensor failure.-F7-Power to magnetron interrupted.:Flashing colon on display indicates a power failure has occurred.F0No error.F10Display error.F1E1Primary control failureF2Keyboard (membrane switch) failure.F2E1Stuck button or user interface mismatch (keypad/user interface failure)F2KKey or foil pressed more than 1 minute.F2TTouch panel pressed more than 1 minute.F3E1Exhaust thermistor is open.F3E2Exhaust thermistor has shorted.F3E6Moisture sensor strip is openF3E7Moisture sensor strip has shortedF3HHumidity sensor out of range.F3TTemperature sensor out of range.F7Power to magnetron interrupted.F9CE2PROM CheckSum error.F9EE2PROM empty.F9ME2PROM missing.F9WE2PROM write error.

Service modes (10)

  • Customer-Focused Drying Mode Adjustment1. Ensure dryer is in standby mode. 2. Press and hold the TEMP button for more than 6 seconds. 3…
  • Self-Diagnostic Test Mode (Touch Panel and Microcomputer Board Test)["Depress the 'Cancel OFF' button while opening the door.","While still depressing the 'Cancel OFF'…
  • Service Diagnostic Mode1
  • Test Mode (Self-Diagnostic)["Press the clock key.","Touch 'Hours' on the touch screen and set hours to '1'.","Touch 'Minutes'…
  • test_mode["Press the clock key.","Press keys 1, 2 and 3 on the keyboard.","Touch AM/PM on the touch screen…
  • Touch Panel and Electronic Control Self-Diagnostic Test Mode["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
  • Touch Panel and Electronic Control Test (Diagnostic/Test Mode)["Press and hold the OFF/CANCEL button while opening the door.","While still holding the OFF/CANCEL…
  • Touch Panel and Microcomputer Board Self-Diagnostic Test Mode["Press the Clock key.","Press keys 1, 2, and 3 on the keyboard.","Touch AM/PM on the touch screen…
  • Touch Panel and Microcomputer Board Test (Self-Diagnostic)["Depress the CANCEL•OFF button while opening the door.","While still depressing the CANCEL•OFF…
  • User Interface/Control System Test1. First activate Service Diagnostic Mode. 2. Press and release the 1st button used to enter…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Amana air conditioner models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass