ASKO WM251

Available documentation

Error codes (5)

Service modes (12)

• Test Programme1
• test_programme["Perform total reset: Make sure main power switch is off, hold Start/Stop button (S1) and press…
• Total Reset1
• total_reset["Make sure that the main power switch is off.","Hold the start/stop button (S1) in and start the…
• Variant Setting - Automatic Door Opening1
• Variant Setting - Number of Rinses1
• Variant Setting - Super Rinse or Delayed Start1
• Variant Setting - Temperature/Spin Speed or Stain/Super Rinse1
• variant_setting_automatic_door_opening["Hold the door open button (S2) pressed in when you switch on the main power switch until L7-L16…
• variant_setting_number_of_rinses["Hold both start/stop button (S1) and door open button (S2) pressed in when you switch on the main…
• variant_setting_super_rinse_or_delayed_start["Hold S5 or S6 pressed in when you switch on the main power switch until L7-L16 flash.","Change…
• variant_setting_temperature_spin_speed_or_stain_super_rinse["Hold S4 pressed in when you switch on the main power switch until L7-L16 flash.","Change the…

Full entry steps, exit procedures, and test sequences are available in Max.