mypros+
Model reference

Electrolux 911926XXX

Dishwasher

1 document12 error codes9 service modes

Available documentation

Service Manual

  • Service Manual Dishwashers37 pg
    Covers this model
MyPros+ Max

Diagnose your Electrolux 911926XXX.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (12)

CodeMeaning
F0Water fill instability during dynamic fill or washing phasei10Water fill time-outi20Water drain time-outi30Intervention of anti-flooding systemi50Motor triac short-circuitedi60Heating time-outi70NTC temperature sensor short-circuited or open, or overheating detected…i80Communication error between the microprocessor and the EEPROM.i90Problems with software configuration.ib0Problems with the turbidity meter (calibration time-out).id0Problems with the washing motoriF0Water replenishment time-out

Service modes (9)

  • Activate/deactivate buzzer (user)["Cancel any selected cycles.","Press S0 to switch the appliance on.","Press buttons S2 and S3…
  • Cancel alarm codes from memory / Test LEDs["Access diagnostics mode.","Press button S2 to cancel the alarms.","All the LEDs and the digits…
  • Deactivate rinse-aid function (user)["Cancel any selected cycles.","Press S0 to switch the appliance on.","Press buttons S2 and S3…
  • Diagnostics mode["Switch off the appliance.","Press buttons S1 and S3 simultaneously and hold down.","Press key S0…
  • Disable pulse washing (service)["Access diagnostics mode.","Press buttons S2 and S3 simultaneously.","Display indicates status
  • Extra cold rinse option (service)["Access diagnostics mode.","Press buttons S1 and S2 simultaneously.","Display indicates status
  • Functional testing cycle["Access diagnostics mode.","Press button S3 to start the cycle.","LEDs LD1, LD2 switch off while…
  • Read alarms and activate individual components["Access diagnostics mode.","Press button S1 to start the function. LEDs LD2 and LD3 switch off…
  • Set regeneration level (user)["Cancel any selected cycles.","Press key S0 to switch the appliance on.","Press buttons S2 and S3…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Electrolux dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax