Electrolux Dishwasher Error Code i30

The i30 code means the dishwasher's anti-flooding system has been triggered by water collecting in the base pan beneath the tub. The machine responds by stopping the wash cycle and running the drain pump continuously to clear the water. This is a protective function designed to prevent water damage to your home. The underlying cause is typically a leak, an overfilling solenoid, or a stuck float sensor.

No, you should not continue using the dishwasher while the i30 code is active. The error indicates water has entered the base pan, which means there is an active or recent leak somewhere in the machine. Running the appliance again before the leak is repaired risks worsening water damage to your kitchen floor and cabinetry. Leave the dishwasher off and allow the base pan to dry before investigating the cause.

Repair costs vary depending on the cause. Clearing a jammed float sensor costs nothing if you do it yourself. Replacing a fill solenoid valve or microswitch typically runs between $30 and $90 for parts, plus labor if you use a technician. A faulty control board is the most expensive repair, with parts alone often ranging from $100 to $250 or more. Professional labor charges for a dishwasher repair visit generally add $80 to $150 on top of part costs.

Some causes of the i30 error are accessible to a confident DIYer. You can check the base pan for standing water, clear and dry it out, and inspect the float sensor for debris jamming it in place. Checking hose connections and clamps for obvious leaks is also straightforward. However, diagnosing a faulty microswitch, testing the fill solenoid, or identifying a circuit board fault typically requires electrical testing tools and some appliance repair experience.

A reset may temporarily clear the i30 code if the base pan has dried out and the float has dropped back to its resting position, but the error will return if the underlying problem has not been fixed. If the float is stuck, the microswitch is faulty, or a leak is still present, the code will reappear as soon as the machine tries to fill with water. Always resolve the root cause before relying on a reset.