mypros+
Model reference

Electrolux EDW1510

Dishwasher

2 documents12 error codes15 service modes

Available documentation

Service Manual

  • Service Manual Dishwashers37 pg
    Covers this model
  • Service Manual Dishwashers37 pg
    Covers this model
MyPros+ Max

Diagnose your Electrolux EDW1510.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (12)

CodeMeaning
F0Water fill instability during dynamic fill or washing phasei10Water fill time-outi20Water drain time-outi30Intervention of anti-flooding systemi50Motor triac short-circuitedi60Heating time-out (temperature must increase by a certain amount every 3…i70NTC sensor short-circuited or open; the programme continues to the end without…i80Communication error between the microprocessor and the EEPROM; machine…i90Problems with software configuration; the fault occurs when switching on, no…ib0Problems with the turbidity meter (calibration time-out); programme continues…id0Problems with the washing motoriF0Water replenishment time-out (3 times during the T.S

Service modes (15)

  • Activate/deactivate buzzer (user)["Cancel any selected cycles.","Press S0 to switch the appliance on.","Press buttons S2 and S3…
  • Activate/disactivate buzzer (user accessible)1. Cancel any selected cycles. 2. Press S0 to switch on. 3. Press S2+S3 simultaneously until LEDs…
  • Cancel alarm codes from memory / Test LEDs1
  • Deactivate rinse-aid function (user)["Cancel any selected cycles.","Press S0 to switch the appliance on.","Press buttons S2 and S3…
  • Diagnostics mode1
  • Disable pulse washing (service)["Access diagnostics mode.","Press buttons S2 and S3 simultaneously.","Display indicates status
  • Disactivate rinse-aid function (user accessible)1. Cancel any selected cycles. 2. Press S0 to switch on. 3. Press S2+S3 simultaneously until LEDs…
  • Extra cold rinse option (service)["Access diagnostics mode.","Press buttons S1 and S2 simultaneously.","Display indicates status
  • Functional testing cycle1
  • Read alarms and activate components1. Access diagnostics mode (S1+S3 held, then S0 on). 2. Press S1 to start the function. LEDs LD2…
  • Read alarms and activate individual components["Access diagnostics mode.","Press button S1 to start the function. LEDs LD2 and LD3 switch off…
  • Service option - Disable pulse washing1. Access diagnostics mode (S1+S3 held, then S0 on). 2. Press S2+S3 simultaneously. Display shows…
  • Service option - Extra cold rinse1. Access diagnostics mode (S1+S3 held, then S0 on). 2. Press S1+S2 simultaneously. Display shows…
  • Set regeneration level (user accessible)1. Cancel any selected cycles. 2. Press S0 to switch on. 3. Press S2+S3 simultaneously until LEDs…
  • Set regeneration level (user)["Cancel any selected cycles.","Press key S0 to switch the appliance on.","Press buttons S2 and S3…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Electrolux dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax