mypros+
Model reference

Electrolux EDW1500

Dishwasher

3 documents23 error codes21 service modes

Available documentation

Service Manual

  • SERVICE MANUAL GESCHIRRSPÜLER mit EDW 150040 pg
    Covers this model
  • Service Manual Dishwashers37 pg
    Covers this model
  • Service Manual Dishwashers37 pg
    Covers this model
MyPros+ Max

Diagnose your Electrolux EDW1500.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (23)

CodeMeaning
F0Water fill instability during dynamic fill or washing phasei0Fill timeout errori10Water fill time-outi2Drain pump faulti20Water drain time-outi3Aqua-Control faulti30Intervention of anti-flooding systemi5Circulation pump triac short circuiti50Motor triac short-circuitedi60Heating time-out (temperature must increase by a certain amount every 3…i7NTC sensor faulti70NTC sensor short-circuited or open; the programme continues to the end without…i8EEPROM communication errori80Communication error between the microprocessor and the EEPROM; machine…i9Checksum error MCF/CCFi90Problems with software configuration; the fault occurs when switching on, no…iASpray arm blockedib0Problems with the turbidity meter (calibration time-out); programme continues…iCCommunication erroridTacho faultid0Problems with the washing motoriFFill time erroriF0Water replenishment time-out (3 times during the T.S

Service modes (21)

  • Activate/deactivate buzzer (user)["Cancel any selected cycles.","Press S0 to switch the appliance on.","Press buttons S2 and S3…
  • Activate/disactivate buzzer (user accessible)1. Cancel any selected cycles. 2. Press S0 to switch on. 3. Press S2+S3 simultaneously until LEDs…
  • Cancel alarm codes from memory / Test LEDs1
  • Customer function: Rinse aid deactivation["1. Switch on the appliance with On/Off button S0 (no wash program selected).","2. Press buttons…
  • Customer function: Signal tone deactivation["1. Switch on the appliance with On/Off button S0 (no wash program selected).","2. Press buttons…
  • Customer function: Water hardness setting["1. Switch on the appliance with On/Off button S0 (no wash program selected).","2. Press buttons…
  • Deactivate rinse-aid function (user)["Cancel any selected cycles.","Press S0 to switch the appliance on.","Press buttons S2 and S3…
  • Diagnostics mode1
  • Disable pulse washing (service)["Access diagnostics mode.","Press buttons S2 and S3 simultaneously.","Display indicates status
  • Disactivate rinse-aid function (user accessible)1. Cancel any selected cycles. 2. Press S0 to switch on. 3. Press S2+S3 simultaneously until LEDs…
  • Extra cold rinse option (service)["Access diagnostics mode.","Press buttons S1 and S2 simultaneously.","Display indicates status
  • Functional testing cycle1
  • Read alarms and activate components1. Access diagnostics mode (S1+S3 held, then S0 on). 2. Press S1 to start the function. LEDs LD2…
  • Read alarms and activate individual components["Access diagnostics mode.","Press button S1 to start the function. LEDs LD2 and LD3 switch off…
  • Service function: Error memory readout and individual actuator activation["1. Press and hold buttons S1 and S3 simultaneously.","2. While holding S1 and S3, switch the…
  • Service function: Factory test program (Fertigungsprüfprogramm)["1
  • Service function: LED test with integrated error memory clearing["1
  • Service option - Disable pulse washing1. Access diagnostics mode (S1+S3 held, then S0 on). 2. Press S2+S3 simultaneously. Display shows…
  • Service option - Extra cold rinse1. Access diagnostics mode (S1+S3 held, then S0 on). 2. Press S1+S2 simultaneously. Display shows…
  • Set regeneration level (user accessible)1. Cancel any selected cycles. 2. Press S0 to switch on. 3. Press S2+S3 simultaneously until LEDs…
  • Set regeneration level (user)["Cancel any selected cycles.","Press key S0 to switch the appliance on.","Press buttons S2 and S3…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Electrolux dishwasher models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax