Model reference

Frigidaire LEEFM389FEB

Range

4 documents22 error codes1 service mode

Available documentation

Service Manual

Electric Range ES510 Control, Self-Cleaning Oven with a Ceramic Cooktop & Bake-n-Warm™ Double Oven Use & Care Manual40 pg
Covers this model

Tech Sheet

Frigidaire Range PLEFMZ99ECG Tech Data Sheet4 pg
Covers this model

Service Flash

SERVICE FLASH CKSF2434 Moisture Migration into ESEC4 pg
Covers this model

Other

Frigidaire Range LEEFM389FEA LEEFM389FEB Tech Data Sheet 3164414642 pg
Covers this model

MyPros+ Max

Diagnose your Frigidaire LEEFM389FEB.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Frigidaire Range

Er on my Frigidaire LEEFM389FEB

M+

ESEC error indicating one or more

From Service Manual 575417, p.29:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part 5304504863

Electronic control board

Error codes (22)

CodeMeaning

ErESEC error indicating one or more surface control knobs were left in the ON…F0 13Bad EEPROM checksum (ESEC system).F0 15ESEC Self-test failure.F10Runaway oven temperature.F11Electronic oven control has detected a fault condition (example fault code…F12Bad Micro Identification.F13Bad EEPROM Identification/Checksum error.F20Communication failure between EOC and ESEC system.F26Communication failure with Mini Oven Control Board.F30Shorted probe connection.F31Open or faulty RTD sensor probe connection.F5 00No LinBUS master communication.F7 00Missing connection between Potentiometer/Display Board and UIB.F7 01Missing connection between Potentiometer/Display Board and UIB.F7 10Missing connection between Potentiometer/Display Board and UIB.F90Maximum oven door unlock time exceeded.F91Maximum oven door unlock attempts exceeded.F92Maximum oven door open time exceeded.F93Maximum oven door lock time exceeded.F94Maximum oven door lock attempts exceeded.HEHot Element warning indicating the cooktop surface is still too hot to touch…PFPower failure has occurred; the clock display will flash with 'PF' when the…

Service modes (1)

Oven Temperature Calibration Adjustment["Set EOC to bake at 550°F.","Within 5 seconds of setting 550°F, press and hold the bake pad for…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Frigidaire range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass