Model reference
GE DCCH485EK0MS
Dryer
4 documents12 error codes2 service modes
Available documentation
Service Manual
- 24" Condenser Dryer82 pg
- GE DCCH485EK Condenser Dryer Service Manual82 pg
- 24-in. Condenser Dryer Technical Service Guide49 pg
Other
- 31 9213 24 inch condensing49 pg
MyPros+ Max
Diagnose your GE DCCH485EK0MS.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (12)
CodeMeaning
3E1Motor relay open error triggered when the motor state is running but control…3E2Motor relay stuck error triggered when the motor state is stop but control…5EDrain fail error triggered when water overflow is detected 3 consecutive times.bE2Button error triggered when any key is continuously pressed for more than 30…dEDoor fail error triggered when door interrupt voltage is continuously low level…E00No error present; displayed in service mode only when there are no errors to…HEHeating error triggered when heating temperature exceeds 185°F for more than 10…HE4Heating error (filter check) triggered when clean lint filter condition is…odOver dry error triggered when the dry and cooling process exceeds 240 minutes…Tank fullThe condensation tank is full or the float switch has triggered an overfill…tE2Inlet thermistor error triggered when thermistor voltage is over 4.8V or under…tE4Outlet thermistor error triggered when thermistor voltage is over 4.8V or under…Service modes (2)
- Service ModeFrom idle state (no display)
- Service Test ModeWith power connected but the power button off, within 3 seconds
Full entry steps, exit procedures, and test sequences are available in Max.
Related GE dryer models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass