mypros+
Error code reference

GE Dryer Error Code E00

No faults in the log-displayed in Consumer Fault Code Mode when there are no active faults.

GE codesGE dryer codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E00 error code actually means

E00 is not an error. It just means your GE dryer checked its own memory and found no recorded problems. If your dryer is running fine, seeing E00 is completely normal and nothing needs to be done.

Diagnostic procedure

The full E00 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E00 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E00

Ranked by how often they cause this code
  1. 1Clean fault log after normal operation
  2. 2Fault log cleared by previous service or reset
  3. 3Intermittent issue not yet logged
  4. 4Unit accessed diagnostic mode unintentionally

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E00

What does E00 mean on a GE dryer?
E00 means there are no faults stored in the dryer's control board memory. It appears when you access Consumer Fault Code Mode and the diagnostic log is empty. This is a normal, informational display and does not indicate any problem with the dryer.
Is it safe to use my GE dryer when it shows E00?
Yes, E00 is not a warning or safety alert. It is a status indicator confirming no faults are present in the system log. The dryer is safe to operate normally when this code is displayed.
How much does it cost to repair a GE dryer showing E00?
No repair cost is associated with E00 because it is not an error condition. If you are experiencing a dryer performance issue alongside this display, a diagnostic service call to identify the root cause typically ranges from around $75 to $150 depending on your location and the service provider.
Do I need to fix anything when E00 appears on my GE dryer?
No repair is needed when E00 displays and the dryer is running normally. E00 simply confirms a clean fault log. If your dryer is behaving abnormally despite showing E00, the issue may be a mechanical fault that does not trigger an electronic code, and manual component testing would be the appropriate next step.
Will resetting my GE dryer clear the E00 code?
E00 does not need to be cleared because it is not a fault code. It is simply the system reporting an empty fault log. Performing a power reset will not change this display since there are no stored faults to remove.

Related GE dryer error codes

All GE dryer codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass