GE GTD65GBSJ1WS

Available documentation

Error codes (10)

Service modes (14)

• Field Service Mode["Ensure the control is in idle state (all LEDs off).","Press and hold the Start button.","While…
• t1 - Model Codes / Setting Model Codes["Enter Field Service Mode and select t1.","Press Start to view User Interface Mode Type (3-digit…
• t10 - Door Open/Closed Test["Enter Field Service Mode, rotate knob to t10, press Start."]
• t11 - Water Valve Test["Enter Field Service Mode, rotate knob to t11, press Start."]
• t12 - Restore EEPROM Values["Enter Field Service Mode, rotate knob to t12, press Start."]
• t13 - Drum Test["Enter Field Service Mode, rotate knob to t13, press Start."]
• t2 - UI Software Version Check["Enter Field Service Mode, rotate knob to t2, press Start."]
• t3 - XML Version Check["Enter Field Service Mode, rotate knob to t3, press Start."]
• t4 - Error Codes Display and Clear["Enter Field Service Mode, rotate knob to t4, press Start."]
• t5 - CRC Non-volatile Memory Test["Enter Field Service Mode, rotate knob to t5, press Start."]
• t6 - User Interface Test["Enter Field Service Mode, rotate knob to t6, press Start."]
• t7 - Outlet Thermistor Test["Enter Field Service Mode, rotate knob to t7, press Start."]
• t8 - Inlet Thermistor Test["Enter Field Service Mode, rotate knob to t8, press Start."]
• t9 - Moisture Sensor Test["Enter Field Service Mode, rotate knob to t9, press Start."]

Full entry steps, exit procedures, and test sequences are available in Max.