GE JCK915

Available documentation

Error codes (9)

Service modes (13)

• Control LockoutPress the 9 & 0 pad or down arrow time slew key for 3 seconds
• Glass Touch Parameter Setting (Control Not Replaced)1
• Glass Touch Parameter Setting (New Part Installation)1
• J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
• JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
• JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
• JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
• LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
• Oven Calibration1. Press and hold Bake & Broil pads until SF appears in display. 2. Press Bake pad to enter oven…
• Recall Stored F-codesPress TIMER, CLOCK, and MIN DOWN (or 9) simultaneously.
• Sales ModePress Clock and Timer pads at the same time.
• Special Functions (SF) ModePress and hold BAKE and BROIL pads simultaneously for 2 seconds until SF appears in display.
• Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…

Full entry steps, exit procedures, and test sequences are available in Max.