Model reference

GE JT955

Oven

10 documents10 error codes18 service modes

Available documentation

Service Manual

  • Electronic Oven Control5 pg
    Covers this model
  • GE Oven JT955SK4SS Users Manual32 pg
    Covers this model
  • 31 9098 GE Monogram 27 and 30 inch Wall Ovens Service Manual51 pg
    Covers this model

Tech Sheet

  • Appliance Diagnostic Modes Range GE Consumer & Industrial Technical Training255 pg
    Covers this model

Bulletin

  • Service Bulletin RANGE RA 04-041 pg
    Covers this model
  • Calibration Error and F0 Display1 pg
    Covers this model
  • Service Bulletin - Calibration Error and F0 Display1 pg
    Covers this model

Training

  • GE and Monogram 27-In. and 30-In. Wall Ovens Technical Service Guide51 pg
    Covers this model

Installation Guide

  • Installation Instructions - 30" Built-In Wall Oven16 pg
    Covers this model

Other

  • tech man JTP28255 pg
    Covers this model
MyPros+ Max

Diagnose your GE JT955.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Service modes (18)

  • Control LockoutPress the 9 & 0 pad or down arrow time slew key for 3 seconds
  • F Code RecallPress TIMER, CLOCK, MIN DOWN (or 9) together.
  • Glass Touch Parameter Setting (Control Not Replaced)1
  • Glass Touch Parameter Setting (New Part Installation)1
  • J2S968/JGS968/JGSP48 Fault Code Recall["Press TIMER, CLOCK, and MIN DOWN (or 9) key to get Fault Codes to appear."]
  • JB905/968/988 Fault Code Recall["Press TIMER and CLOCK (or 9) key to get Fault Codes to appear."]
  • JP938/JP968 Cooktop Calibration Mode["Clear everything from the top of the glass.","Lock the control by pressing the LOCK key for 3…
  • JP938/JP968 Cooktop Technician Mode["Lock cooktop by holding CONTROL LOCK key for 3 seconds.","Control will beep 2 times and LOCK…
  • LOC REF Procedure (JCK915/JCT915/JK915/JT915/JK955/JT955/ZEK938/ZET958)["Reinitiate LOC REF procedure by pressing BAKE/BROIL simultaneously.","For digital keypads press 9…
  • Lock Reference (Control Not Replaced)1
  • Lock Reference (Control Replaced)1
  • Oven Calibration1. Press and hold Bake & Broil pads until SF appears in display. 2. Press Bake pad to enter oven…
  • Recall Stored F-codesPress TIMER, CLOCK, and MIN DOWN (or 9) simultaneously.
  • Sales ModePress Clock and Timer pads at the same time.
  • Special Features (SF) Mode["Press the BAKE and BROIL HI/LO pads (on double oven models, use the upper oven controls) at the…
  • Special Functions (SF)Press and hold the BAKE and BROIL pads for 3 seconds until 'SF' appears in the display.
  • Special Functions (SF) ModePress and hold BAKE and BROIL pads simultaneously for 2 seconds until SF appears in display.
  • Trivection Service Mode["Disconnect main power to the oven for at least 15 seconds.","Reconnect power and enter 0803 on…

Full entry steps, exit procedures, and test sequences are available in Max.

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax