mypros+
Model reference

LG LFC22760SB

Refrigerator

6 documents15 error codes13 service modes

Available documentation

Service Manual

  • Refrigerator Service Manual49 pg
    Covers this model
  • Refrigerator Service Manual66 pg
    Covers this model
  • Bottom Freezer Refrigerator Owner's Manual36 pg
    Covers this model

Bulletin

  • SERVICE BULLETIN 3REF20070171 - Change of compressor3 pg
    Covers this model
  • Bottom Freezer Gasket Improvement (22cuft WB)3 pg
    Covers this model

Other

  • 3REF20070183 Power Cord4 pg
    Covers this model
MyPros+ Max

Diagnose your LG LFC22760SB.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Service modes (13)

  • Demonstration (Display) ModePress and hold the Refrigerator Temp button and the Ice Plus button simultaneously for 5 seconds…
  • Demonstration MODEPress ICE PLUS key and ADJUST key of refrigerator temperature control at the same time for more…
  • DISPLAY CHECK MODE (LED Check Mode)Press ADJUST REFRIGERATOR TEMP and ADJUST FREEZER TEMP at the same time for more than 1 second.
  • Freezer Fan RPM Variable CheckWhile freezer fan is in operation, press ADJUST key of Refrigerator and Freezer Temperature Control…
  • Ice Maker Test ModePress and hold the Fill Key (Test Switch) on the ice maker for more than 3 seconds.
  • Icemaker Test ModePress and hold the Cube Size button for 3 seconds.
  • RESETPush the Test switch on the Main PCB once while in TEST3 mode.
  • Reset (from TEST MODE)While in TEST MODE 2, press ICE PLUS key and ADJUST key of Freezer Temperature at the same time for…
  • TEST MODE 1Press ICE PLUS key and ADJUST key of Freezer Temperature at the same time for more than 3 seconds.
  • TEST MODE 2While in TEST MODE 1, press ICE PLUS key and ADJUST key of Freezer Temperature at the same time for…
  • TEST1Push the Test switch on the Main PCB once.
  • TEST2Push the Test switch on the Main PCB once while in TEST1 mode.
  • TEST3Push the Test switch on the Main PCB once while in TEST2 mode.

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass