Model reference

Maytag JMW9130DA

Name: Maytag JMW9130DA
Brand: Maytag

Oven

1 document27 error codes9 service modes

Available documentation

Tech Sheet

Electric Wall Oven/Microwave⎯Technical Information13 pg
Covers this model

MyPros+ Max

Diagnose your Maytag JMW9130DA.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Oven

1c1c on my Maytag JMW9130DA

M+

Shorted key detected on control panel.

From Tech Sheet W14257313, p.45:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (27)

CodeMeaning

1c1cShorted key detected on control panel.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key reading improper value.1c32Cancel key circuit problem; cancel key reading improper value.1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range 1c8cCooking program error; CRC invalid.1d11Runaway temperature (650°F) with door unlocked; sensor resistance greater than…1d12Runaway temperature (650°F) with door unlocked; sensor resistance greater than…1d21Runaway temperature (950°F) with door locked; sensor resistance greater than…1d22Runaway temperature (950°F) with door locked; sensor resistance greater than…3d11Temperature sensor open; sensor resistance reads infinite ohms.3d12Temperature sensor open; sensor resistance reads infinite ohms.3d21Temperature sensor shorted; sensor resistance reads 0 ohms.3d22Temperature sensor shorted; sensor resistance reads 0 ohms.4d11Door switch position failure; door switch not closed when door is locked.4d12Door switch position failure; door switch not closed when door is locked.4d21No reverse airflow fan rotation (no or low RPM detected).4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure; door switch not reading open or closed.4d52Door switch circuit failure; door switch not reading open or closed.9d11Door latch will not lock; lock switch not reading closed.9d12Door latch will not lock; lock switch not reading closed.9d21Door latch will not unlock; unlock switch not reading closed.9d22Door latch will not unlock; unlock switch not reading closed.9d31Latch state unknown; both locked and unlocked switches reading simultaneously.9d32Latch state unknown; both locked and unlocked switches reading simultaneously.

Service modes (9)

24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 to 5 seconds.
Child LockoutPress and hold Cancel and Cook & Hold pads for 3 seconds
Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
Diagnostic Code Display1
Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds.
Oven Temperature Adjustment1
Quick Test1
Sabbath ModeHold CLOCK pad for 3 to 5 seconds to activate Sabbath mode.
Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 to 5 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass