Model reference

Maytag MMW5530DAW

Name: Maytag MMW5530DAW
Brand: Maytag

Oven

12 documents40 error codes28 service modes

Available documentation

Tech Sheet

Tech Sheet - 1602282211 pg
Covers this model
Electric Wall Oven/Microwave—Technical Information11 pg
Covers this model
Electric Wall Oven/Microwave⎯Technical Information12 pg
Covers this model

Service Manual

Combination Electric Wall Ovens and Microwaves Service Manual45 pg
Covers this model
JennAir Wall Oven MW JMW8527DA JMW8530DA JMW9527DA JMW9530DA MMW5530DA Service Manual 1602282145 pg
Covers this model
Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
Covers this model
FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
Covers this model

Bulletin

Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Covers this model
Technical Bulletin - TDC-0096-B Oven Door Handles Breaking2 pg
Covers this model

Service Flash

Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Covers this model

Installation Guide

Installation Instructions6 pg
Covers this model

Other

TDC 0096 B2 pg
Covers this model

MyPros+ Max

Diagnose your Maytag MMW5530DAW.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Oven

1c1c on my Maytag MMW5530DAW

M+

Shorted key detected on control panel.

From Tech Sheet W12265195, p.47:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (40)

CodeMeaning

1c1cShorted key detected on control panel.1c2cKeyboard tail disconnected or keyboard loop has improper value.1c31Cancel key circuit failure 1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cMicro communication failure (checksum invalid).1c5cVcc or ground fault at test point.1c6cEEPROM error (checksum invalid).1c7cControl not calibrated 1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error (checksum invalid).1d11Runaway oven temperature with door unlocked.1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway oven temperature with door locked.1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Temperature sensor open circuit detected.3d12Temperature sensor failure (open) on lower oven cavity 3d21Temperature sensor shorted.3d22Temperature sensor failure (short) on lower oven cavity 3d41Meat probe shorted 3d51Meat probe not calibrated 4d11Door switch input circuit failure.4d12Door switch position failure 4d21No cooling fan rotation (no RPM detected).4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Fan state error 4d32Reverse Airflow Fan state error 4d41Low cooling fan rotation (RPM below threshold speed).4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure

View all 40 error codes

4d52Door switch circuit failure 9d11Door latch will not lock.9d12Door latch will not lock on lower oven cavity 9d21Door latch will not unlock.9d22Door latch will not unlock on lower oven cavity 9d31Unlock state unknown.9d32Door latch both locked and unlocked simultaneously on lower oven 9d41Unlock condition detected unexpectedly.9d51Lock and unlock state both unknown.9d61Door position switch open circuit.

Service modes (28)

24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 seconds.
Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
Child LockoutPress and hold Cancel and Cook & Hold pads for 3 seconds
Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 seconds.
Diagnostic Code DisplayPress and hold the 0/AUTOSET pad while powering up the unit
Diagnostic Code Display Mode (H1 Control)1
Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
Faults Access (EOC III Controls)1
One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
Oven Temperature Adjustment1
Quick TestPress and hold CANCEL and BROIL pads simultaneously for 3 seconds
Quick Test Mode (EOC III Controls)1
Quick Test Mode (H1 Control)1
Quick Test Mode (H1 Controls - Convection Model)1
Quick Test Mode (H1 Controls - Non-Convection Model)1
Quick Test Mode (H2/H2.5 Controls)1
Quick Test Mode (H3 Controls)1
Quick Test Mode (M1/M2 Controls)1
Quick Test Mode (NSC Non-Self Clean Controls)1
Sabbath ModeHold CLOCK button for 3 seconds to activate Sabbath mode.
Service Mode (EOC III Controls)1
Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 seconds.
Test Mode (UH Controls)1
Test Mode (UH1/2 Control)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag oven models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass