Model reference
Maytag AER5735QA
Range
6 documents27 error codes19 service modes
Available documentation
Service Manual
- Electric Freestanding Range Service Manual36 pg
- Electric Freestanding Range Base Manual36 pg
Bulletin
- Technical Bulletin - TDC-0049-B - Use and Care Manual - Baking Notes and Delayed Bake1 pg
- Technical Bulletin - Use & Care Manual -- Baking Notes/Delayed Bake1 pg
- Technical Bulletin - Elimination of 74008715 Thermal Limiter Switch1 pg
- Technical Bulletin - Automatic Oven Light Operation1 pg
MyPros+ Max
Diagnose your Maytag AER5735QA.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (27)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected from the control circuit board.1c31Cancel key circuit problem (cancel key improper value).1c32Cancel key circuit problem (cancel key improper value, secondary instance).1c6cEEPROM error1c7cControl not calibrated1c8cCooking program error1d11Runaway temperature (650°F) detected with door unlocked; sensor resistance >…1d12Runaway temperature (650°F) detected with door unlocked (secondary instance)…1d21Runaway temperature (950°F) detected with door locked; sensor resistance > 2787…1d22Runaway temperature (950°F) detected with door locked (secondary instance)…3d11Oven temperature sensor open3d12Oven temperature sensor open (secondary instance)3d21Oven temperature sensor shorted3d22Oven temperature sensor shorted (secondary instance)4d11Door switch position failure4d12Door switch position failure (secondary instance)4d21No reverse airflow fan rotation detected (no or low RPM).4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure4d52Door switch circuit failure (secondary instance)9d11Latch will not lock9d12Latch will not lock (secondary instance)9d21Latch will not unlock9d22Latch will not unlock (secondary instance)9d31Latch state unknown9d32Latch state unknown (secondary instance)Service modes (19)
- 24 Hour Clock Toggle (H1 Control)["Press and hold Cancel and Favorites pads for 3 seconds."]
- 24 Hour Clock Toggle (M1 Control)["Press and hold Cancel and Delay pads for 3 seconds."]
- 24 Hour Clock Toggle (M2 Control)["Press and hold Cancel and Favorite pads for 3 seconds."]
- Child Lockout["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' displays where temperature…
- Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 seconds."]
- Diagnostic Code Display (H1 Control)Press and hold AUTOSET pad for 3 seconds at power-up
- Diagnostic Code Display (M1 Control)Press and hold Up Arrow pad and power up the unit
- Diagnostic Code Display (M2 Control)Press and hold Up Arrow pad and power up the unit
- Diagnostic Code Display Mode (H1 Control)["Press and hold the AUTOSET pad for 3 seconds at power-up (during Power On Reset).","Cycle through…
- Diagnostic Code Display Mode (M1/M2 Control)["Press and hold the Up Arrow pad while powering up the unit.","Cycle through stored codes using…
- Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 seconds."]
- Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
- Oven Temperature Adjustment (M1/M2 Control)["Press BAKE pad.","Enter 550 using slew pads.","Immediately press and hold BAKE pad for 3…
- Quick Test (H1 Control)1
- Quick Test (M1/M2 Control)1
- Quick Test Mode (H1 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
- Quick Test Mode (M1/M2 Control)["Press and hold CANCEL and BROIL pads simultaneously for 3 seconds.","Once the control has entered…
- Sabbath Mode["Hold CLOCK pad for 3 seconds to activate Sabbath mode.","'SAb' will be displayed and flash for 5…
- Temperature Display Toggle (F/C)["Press and hold Cancel and Bake pads for 3 seconds."]
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
75,000+ service documents · 20,000+ error codes · 100+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass