Model reference

Maytag JDS8850AAQ

Range

8 documents39 error codes12 service modes

Available documentation

Service Manual

jennair-jds885062 pg
Covers this model
maytag-jds-duel62 pg
Covers this model
Service Manual - Dual Fuel Slide-In Range62 pg
Covers this model
Jenn Air JDS9860AAB Service62 pg
Covers this model
Dual Fuel Slide-In Range Service Manual62 pg
Covers this model
Service Manual - Dual Fuel Slide-In Range73 pg
Covers this model

Tech Sheet

Technical Information⎯Dual Fuel Slide-In Range15 pg
Covers this model

Other

1602601662 pg
Covers this model

MyPros+ Max

Diagnose your Maytag JDS8850AAQ.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag JDS8850AAQ

M+

Shorted key detected on the membrane

From Tech Sheet W15465597, p.49:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (39)

CodeMeaning

1c1cShorted key detected on the membrane keyboard.1c2cMembrane keyboard disconnected from the control board.1c4cBoard-to-board communication failure.1c6cEEPROM hardware fault.1c7cControl not calibrated.1c81EEPROM CRC error in Cook Profile data.1c8cEEPROM CRC error in User Options data.1d11Unlocked runaway temperature condition detected at 600°F.1d21Locked runaway temperature condition detected at 950°F.3d11Oven temperature sensor circuit is open.3d21Oven temperature sensor circuit is shorted.3d41Meat probe circuit is shorted.3d51Meat probe is not calibrated.4d11Door switch not closed when door is locked.4d21No cooling fan rotation detected.4d31Cooling fan is on when it should be de-energized.4d41Cooling fan overspeed condition detected.4d51Door switch circuit fault detected.9d11Door latch will not lock.9d21Door latch will not unlock.9d31Door latch reporting both locked and unlocked simultaneously.F0-0No fault present.F1-1Oven temperature above 650°F (343°C) in bake mode.F1-3Oven temperature above 950°F (510°C) during a clean cycle.F1-5Cancel pad not responding.F1-7Membrane disconnected.F1-8Shorted key (pad) in membrane switch.F1-9Internal control communication errors.F1-ALock/unlock switch state not advancing to control.F1-COven door switch state not advancing to control.

View all 39 error codes

F1-EControl not calibrated.F1-FJumper not removed from printed circuit board (PCB).F1-HEEPROM error.F1-NInternal voltage for slave micro incorrect.F3-1Open or shorted oven temperature sensor.F8Shorted meat probe.F9-1Oven door will not lock.F9-2Oven door will not unlock.F9-3Oven door status is both locked and unlocked.

Service modes (12)

Control LockoutPress the Back and Setup pads simultaneously for 5 seconds to lock.
Control Reset1
Demo Mode1
Display Test1
Faults Access1
Oven Temperature AdjustmentPress Bake pad and enter 550°F (288°C)
Quick Test ModePress and hold Cancel and Broil pads simultaneously for 3 seconds at power-up, or within 5 minutes…
Quick Test Mode (EOC II)1
Quick Test Mode (EOC III)1
Service Mode1
Setup Options (Factory Default Options)Press Setup Options and the desired pad simultaneously (see table for specific pad combinations)
Software Versions Access1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass