Model reference

Maytag JGR8775QDQ

Name: Maytag JGR8775QDQ
Brand: Maytag

Range

17 documents27 error codes25 service modes

Available documentation

Tech Sheet

Gas Freestanding Range Technical Information10 pg
Covers this model
Tech Sheet - 1602250210 pg
Covers this model

Service Manual

Gas Freestanding Range Base Manual42 pg
Covers this model
Maytag Freestanding Range Repair Service Manual42 pg
Covers this model
Service Manual - Gas Freestanding Range42 pg
Covers this model
Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
Covers this model

Bulletin

Technical Bulletin - TDC-0075-B-French Gas Valve Regulator1 pg
Covers this model
Technical Bulletin - TDC-0075-B Gas Valve Regulator1 pg
Covers this model
Technical Bulletin - Surface Valve Replacement Availability1 pg
Covers this model
Technical Bulletin - LP Conversion Kits1 pg
Covers this model
Technical Bulletin - Door Glass Rattle1 pg
Covers this model
Technical Bulletin - Gas Valve Regulator1 pg
Covers this model
Technical Bulletin - TDC-0075-B Gas Valve Regulator1 pg
Covers this model
Technical Bulletin1 pg
Covers this model
Technical Bulletin - Automatic Oven Light Operation1 pg
Covers this model

Tech Tip

gasconversion-8101p718-60.pdf24 pg
Covers this model

Installation Guide

Installation Instructions21 pg
Covers this model

MyPros+ Max

Diagnose your Maytag JGR8775QDQ.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag JGR8775QDQ

M+

Shorted key detected on the control

From Tech Sheet W12322414, p.26:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (27)

CodeMeaning

1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected 1c31Cancel key circuit problem 1c32Cancel key circuit problem 1c6cEEPROM error 1c7cControl not calibrated 1c8cCooking program error 1d11Runaway oven temperature (650°F) with door unlocked 1d12Runaway oven temperature (650°F) with door unlocked 1d21Runaway oven temperature (950°F) with door locked 1d22Runaway oven temperature (950°F) with door locked 3d11Temperature sensor open 3d12Temperature sensor open 3d21Temperature sensor shorted 3d22Temperature sensor shorted 4d11Door switch position failure 4d12Door switch position failure 4d21No reverse airflow fan rotation 4d31Reverse airflow fan is on when it should be off.4d51Door switch circuit failure 4d52Door switch circuit failure 9d11Door latch will not lock 9d12Door latch will not lock 9d21Door latch will not unlock 9d22Door latch will not unlock 9d31Door latch state unknown 9d32Door latch state unknown

Service modes (25)

24 Hour Clock TogglePress and hold Cancel and Favorite pads for 3 seconds.
24 Hour Clock Toggle (H1/M2 Control)Press and hold Cancel and Favorite pads for 3 seconds.
24 Hour Clock Toggle (M1 Control)Press and hold Cancel and Delay pads for 3 seconds.
Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 seconds
Child Lock Out (H1/M1/M2 Control)["Press and hold Cancel and Cook & Hold pads for 3 seconds.","'OFF' will display where temperature…
Child LockoutPress and hold Cancel and Cook & Hold pads for 3 seconds
Clock Display TogglePress and hold Cancel and Clock pads for 3 seconds.
Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 seconds.
Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 seconds at power-up
Diagnostic Code Display Mode (H1 Control)Press and hold the AUTOSET pad for 3 seconds at power-up
Diagnostic Code Display Mode (M1 Control)Press and hold Up Arrow pad while powering up the unit
Diagnostic Code Display Mode (M1/M2 Control)Press and hold the Up Arrow pad and power up the unit
Diagnostic Code Display Mode (M2 Control)Press and hold Up Arrow pad while powering up the unit
Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 seconds.
Oven Temperature Adjustment1
Oven Temperature Adjustment (H1 Control)["Press BAKE pad.","Enter 550 on the digit-pad.","Immediately press and hold BAKE pad for 3…
Oven Temperature Adjustment (H1/M1/M2 Control)1
Oven Temperature Adjustment (H1/M1/M2 Controls)1
Quick Test ModePress and hold CANCEL and BROIL pads simultaneously for 3 seconds
Quick Test Mode (H1 Control)1
Quick Test Mode (M1/M2 Control)1
Sabbath ModeHold CLOCK pad for 3 seconds to activate Sabbath mode
Sabbath Mode (H1/M1/M2 Control)["Hold CLOCK pad for 3 seconds to activate Sabbath mode."]
Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 seconds.
Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass