Model reference
Maytag MER5752ACW
Range
10 documents36 error codes34 service modes
Available documentation
Tech Sheet
- Tech Sheet - 16023542F (FR)10 pg
- Tech Sheet - 160235428 pg
- wiringsheet-8119p095-60-fr.pdf1 pg
- Electric Freestanding Range — Technical Information8 pg
- Electric Freestanding Range — Technical Information8 pg
Service Manual
- Service Manual - Freestanding Electric Range54 pg
- Service Manual - Freestanding Electric Range54 pg
- Freestanding Electric Range Service Manual54 pg
- Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
- FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
MyPros+ Max
Diagnose your Maytag MER5752ACW.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (36)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected; keyboard loop reading improper value.1c31Cancel key circuit problem; cancel key reading improper value.1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range.1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error; CRC invalid when cook or clean is programmed.1d11Runaway oven temperature (650°F) detected with door unlocked; sensor resistance…1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway oven temperature (950°F) detected with door locked; sensor resistance…1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Oven temperature sensor open circuit; sensor resistance reading infinite ohms.3d12Temperature sensor failure (open) on lower oven cavity3d21Oven temperature sensor shorted; sensor resistance reading 0 ohms.3d22Temperature sensor failure (short) on lower oven cavity3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch not closed when door is locked.4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch not reading open or closed (faulted state).4d52Door switch circuit failureView all 36 error codes
9d11Door latch will not lock; lock switch not closed when it should be locked.9d12Door latch will not lock on lower oven cavity9d21Door latch will not unlock on upper/single oven cavity9d22Door latch will not unlock on lower oven cavity9d31Door latch both locked and unlocked simultaneously on upper/single oven9d32Door latch both locked and unlocked simultaneously on lower oven
Service modes (34)
- 12-Hour Shutoff DisableThe control automatically cancels all cooking and deactivates all relay drivers 12 hours after the…
- 12/24 Hour Clock FormatPress and hold Cancel and Delay simultaneously for 3-5 seconds. Use More + or Less
- 24 Hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
- Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds.
- Child Safety LockPress and hold Cancel and Cook & Hold simultaneously for 3-5 seconds until a beep sounds.
- Clock Display On/OffPress and hold Cancel and Clock simultaneously for 3-5 seconds.
- Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
- Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Diagnostic Code DisplayPress and hold the More + pad within 60 seconds of powering up the unit. Cycle through the stored…
- Diagnostic Code Display Mode1. Within 60 seconds of powering on the appliance, press and hold the More + key. 2. Scroll through…
- Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
- Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
- Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
- Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds.
- Faults Access (EOC III Controls)1
- One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
- Oven Temperature Adjustment1. Press Bake pad. 2. Enter 550 on the digit-pad. 3. Immediately press and hold Bake pad for 3 to 5…
- Oven Temperature Calibration Adjustment1. Press Bake. 2. Enter 550 on the numeric keypad. 3. Immediately press and hold Bake for 3-5…
- Quick Test1
- Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
- Quick Test Mode (EOC III Controls)1
- Quick Test Mode (H1 Controls - Convection Model)1
- Quick Test Mode (H1 Controls - Non-Convection Model)1
- Quick Test Mode (H2/H2.5 Controls)1
- Quick Test Mode (H3 Controls)1
- Quick Test Mode (M1/M2 Controls)1
- Quick Test Mode (NSC Non-Self Clean Controls)1
- Quick Test Mode (Rapid Check)1. Must enter within the first 5 minutes after power-up. 2. Press and hold Cancel and Broil keys…
- Sabbath ModeHold Clock button for 3 to 5 seconds to activate Sabbath mode
- Service Mode (EOC III Controls)1
- Temperature Display (°C/°F toggle)Press and hold Cancel and Bake simultaneously for 3-5 seconds. Use More + or Less
- Temperature Display (°F/°C toggle)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
- Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
- Test Mode (UH Controls)1
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass