mypros+
Model reference

Maytag MER5775RAB1

Range

7 documents17 error codes12 service modes

Available documentation

Tech Sheet

  • Electric Freestanding Range—Technical Information13 pg
    Covers this model
  • Electric Freestanding Range—Technical Information13 pg
    Covers this model
  • Electric Freestanding Range⎯Technical Information9 pg
    Covers this model

Service Manual

  • Failure Codes And Wiring Diagrams For Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model

Bulletin

  • Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
    Covers this model

Service Flash

  • Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
    Covers this model

Other

  • TDC 0096 B2 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MER5775RAB1.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (17)

CodeMeaning
1c1cShorted key detected on control circuit board.1c2cKeyboard tail disconnected; keyboard loop returns improper value.1c31Cancel key circuit problem; cancel key returns improper value.1c6cEEPROM error; no response from EEPROM when accessing it.1c7cControl not calibrated; calibration value out of range.1c8cCooking program error; CRC invalid when cook or clean is programmed.1d11Runaway oven temperature (650°F) detected with door unlocked; sensor resistance…1d21Runaway oven temperature (950°F) detected with door locked; sensor resistance…3d11Oven temperature sensor open circuit; sensor resistance reads infinite ohms.3d21Oven temperature sensor shorted; sensor resistance reads 0 ohms.4d11Door switch position failure; door switch not closed when door is locked.4d51Door switch circuit failure; door switch not reading open or closed.5a6Sabbath Mode is active (displayed as "SaB"); not a fault code but stored in…5AbSabbath Mode is active (status indicator, not a fault code).9d11Door latch will not lock; lock switch not closed when latch should be locked.9d21Door latch will not unlock; unlock switch not closed when latch should be…9d31Latch state unknown; both lock and unlock switches read closed simultaneously.

Service modes (12)

  • 24-Hour Clock TogglePress and hold CANCEL and FAVORITE pads for 3 to 5 seconds.
  • Child LockoutPress and hold CANCEL and COOK & HOLD pads for 3 to 5 seconds
  • Clock Display TogglePress and hold CANCEL and CLOCK pads for 3 to 5 seconds.
  • Diagnostic Code Display1
  • Diagnostic Code Display Mode["Must be accessed within 30 seconds after applying power to the control.","Press and hold UP ARROW…
  • Factory Default ResetPress and hold CANCEL and KEEP WARM pads for 3 to 5 seconds.
  • Oven Temperature Adjustment1
  • Quick Test1. Press and hold Cancel and Broil pads simultaneously for 3 to 5 seconds (must be within 5 minutes…
  • Quick Test Mode["Must be entered within the first 5 minutes after power-up.","Press and hold Cancel and Broil pads…
  • Sabbath Mode1
  • Temperature Display Toggle (°F/°C)["Press and hold CANCEL and BAKE pads for 3 to 5 seconds."]
  • Temperature Display Toggle (F/C)Press and hold CANCEL and BAKE pads for 3 to 5 seconds.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass