mypros+
Model reference

Maytag MER5875RAS

Range

10 documents37 error codes27 service modes

Available documentation

Tech Sheet

  • Electric Freestanding Range—Technical Information14 pg
    Covers this model
  • Electric Freestanding Range—Technical Information12 pg
    Covers this model
  • Electric Freestanding Range⎯Technical Information15 pg
    Covers this model
  • Electric Freestanding Range—Technical Information15 pg
    Covers this model

Service Manual

  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model

Bulletin

  • Technical Bulletin - TDC-0090-B-French Wiring replacement dual infinite switch1 pg
    Covers this model
  • Technical Bulletin - TDC-0090-B Wiring replacement dual infinite switch1 pg
    Covers this model

Installation Guide

  • Instruction Sheet2 pg
    Covers this model

Other

  • TDC 0096 B2 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MER5875RAS.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (37)

CodeMeaning
1c1cShorted key detected on control board.1c2cKeyboard tail disconnected from control board.1c31Cancel key circuit problem (upper oven / single cavity).1c32Cancel key circuit problem (lower oven).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway oven temperature (650°F) with door unlocked (upper oven / single…1d12Runaway oven temperature (650°F) with door unlocked (lower oven).1d21Runaway oven temperature (950°F) with door locked (upper oven / single cavity).1d22Runaway oven temperature (950°F) with door locked (lower oven).3d11Temperature sensor open circuit (upper oven / single cavity).3d12Temperature sensor open circuit (lower oven).3d21Temperature sensor shorted (upper oven / single cavity).3d22Temperature sensor shorted (lower oven).3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No reverse airflow fan rotation (no or low RPM).4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse airflow fan is on when it should be off.4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure4d52Door switch circuit failure
View all 37 error codes
5a6Sabbath Mode active status indicator (not a fault code)9d11Door latch will not lock (upper oven / single cavity).9d12Door latch will not lock (lower oven).9d21Door latch will not unlock (upper oven / single cavity).9d22Door latch will not unlock (lower oven).9d31Latch state unknown9d32Latch state unknown

Service modes (27)

  • 24-Hour Clock TogglePress and hold Cancel and Favorite pads for 3 to 5 seconds.
  • Child LockoutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds
  • Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
  • Clock Display Toggle (On/Off)Press and hold Cancel and Clock pads for 3 to 5 seconds.
  • Diagnostic Code Display["Press and hold the AUTOSET pad while applying power to the range (hold for 3 to 5…
  • Diagnostic Code Display ModePress and hold AUTOSET pad for 3 to 5 seconds while applying power to the range (at power-up only)
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds.
  • Faults Access (EOC III Controls)1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Oven Temperature Adjustment1
  • Quick Test["Press and hold CANCEL and BROIL pads simultaneously for 3 to 5 seconds.","Once the control has…
  • Quick Test Mode1
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath ModeInitiate desired bake function first, then hold CLOCK pad for 3 to 5 seconds to activate.
  • Service Mode (EOC III Controls)1
  • Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds.
  • Temperature Display Toggle (F/C)Press and hold Cancel and Bake pads for 3 to 5 seconds.
  • Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass