Model reference

Maytag MGR6772BDB

Range

7 documents27 error codes4 service modes

Available documentation

Service Manual

Freestanding Gemini Gas Range Service Manual54 pg
Covers this model

Tech Sheet

Technical Information Gemini Gas Range7 pg
Covers this model
Tech Sheet - 160216887 pg
Covers this model

Bulletin

Technical Bulletin - LP Conversion1 pg
Covers this model
Technical Bulletin - Surface Valve Replacement Availability1 pg
Covers this model

Tech Tip

Instruction Sheet4 pg
Covers this model

Installation Guide

Installation Instructions33 pg
Covers this model

MyPros+ Max

Diagnose your Maytag MGR6772BDB.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

EE on my Maytag MGR6772BDB

M+

Control cannot read E-PROM; unit will

From Tech Sheet W11993202, p.14:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (27)

CodeMeaning

EEControl cannot read E-PROM; unit will shut down.F0-0No fault (default from factory).F1-1Upper oven temperature exceeds 650°F with door unlocked.F1-2Lower oven temperature exceeds 650°F with door unlocked.F1-3Upper oven temperature exceeds 950°F with door locked.F1-4Lower oven temperature exceeds 950°F with door locked.F1-5Upper hardware failure within control.F1-6Lower hardware failure within control.F1-7Membrane switch is not responding.F1-8Shorted key in membrane switch.F1-9Internal communication errors within control.F1-AUpper latch switches fault.F1-BLower latch switches fault.F1-CUpper door switch fault.F1-DLower door switch fault.F1-ESensor input not calibrated.F1-HEEPROM error.F1-LTemperature in ovens are the same for a long period.F1-NInternal voltage on control not working.F3-1Upper sensor is shorted (< 100 ohms) or open (> 5K ohms).F3-2Lower sensor is shorted (< 100 ohms) or open (> 5K ohms).F9-1Upper lock switch is not correct.F9-2Upper unlock switch is not correct.F9-3Control does not see upper door lock.F9-4Lower lock switch is not correct.F9-5Lower unlock switch is not correct.F9-6Control does not see lower door lock.

Service modes (4)

Engineering Test ModePress BAKE pad
Oven Temperature AdjustmentPush BAKE pad
Setup OptionsPress (0) pad
Test ModeMust be activated within the first 5 minutes of power up

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

$29/month · Cancel anytime · Or $9.95 3-day pass