mypros+
Model reference

Maytag MGR6775ADW

Range

10 documents66 error codes39 service modes

Available documentation

Tech Sheet

  • Technical Information—Double Oven Gas Range10 pg
    Covers this model

Service Manual

  • Freestanding Double Oven Gas Range Service Manual69 pg
    Covers this model
  • Service Manual - Freestanding Double Oven Gas Range69 pg
    Covers this model
  • Maytag Gemini Freestanding Double Oven Gas Range Service Manual69 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model

Bulletin

  • Installation Bulletin1 pg
    Covers this model
  • Installation Bulletin - IDC-0008-B LP Gas Conversion1 pg
    Covers this model

Installation Guide

  • Installation Bulletin - IDC-0005-B Location of Electrical and Gas Supply Connections for new Freestanding Double Oven Gas Range1 pg
    Covers this model
  • Instruction Sheet4 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGR6775ADW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (66)

CodeMeaning
1c1cShorted key detected on the control circuit board keyboard.1c2cKeyboard tail disconnected or keyboard loop has improper value.1c31Cancel key circuit problem (cancel key improper value) on upper/single oven…1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c5cVCC or ground fault on control board.1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway temperature (650°F) detected with door unlocked on upper/single oven…1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway temperature (950°F) detected with door locked on upper/single oven…1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Temperature sensor failure (open) on upper/single oven cavity3d12Temperature sensor failure (open) on lower oven cavity3d21Temperature sensor failure (short) on upper/single oven cavity3d22Temperature sensor failure (short) on lower oven cavity3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure
View all 66 error codes
4d52Door switch circuit failure9d11Door latch will not lock on upper/single oven cavity9d12Door latch will not lock on lower oven cavity9d21Door latch will not unlock on upper/single oven cavity9d22Door latch will not unlock on lower oven cavity9d31Door latch both locked and unlocked simultaneously on upper/single oven9d32Door latch both locked and unlocked simultaneously on lower oven9d41Latch state unknown9d42Latch state unknownEEControl cannot read E-PROM; unit will shut down.F0-0No faultF1-1Upper oven temperature exceeds 650°F with door unlocked.F1-2Lower oven temperature exceeds 650°F with door unlocked.F1-3Upper oven temperature exceeds 950°F with door locked.F1-4Lower oven temperature exceeds 950°F with door locked.F1-5Upper hardware failure within control.F1-6Lower hardware failure within control.F1-7Membrane switch is not responding.F1-8Shorted key in membrane switch.F1-9Internal communication errors within control.F1-AUpper latch switches failure.F1-BLower latch switches failure.F1-CUpper door switch failure.F1-DLower door switch failure.F1-ESensor input not calibrated.F1-HEEPROM error.F1-LTemperature in ovens are the same for a long period.F1-NInternal voltage on control not working.F3-1Upper sensor is shorted (<100 ohms) or open (>5K ohms).F3-2Lower sensor is shorted (<100 ohms) or open (>5K ohms).F9-1Upper lock switch is not correct.F9-2Upper unlock switch is not correct.F9-3Control does not see upper door lock.F9-4Lower lock switch is not correct.F9-5Lower unlock switch is not correct.F9-6Control does not see lower door lock.

Service modes (39)

  • 24 Hour Clock TogglePress and hold UPPER CANCEL and DELAY pads for 3 seconds.
  • Beeper Volume AdjustmentPress and hold UPPER CANCEL and MORE (+) pads for 3 seconds.
  • Child Lock OutPress and hold UPPER CANCEL and COOK & HOLD pads for 3 seconds.
  • Clock Display TogglePress and hold UPPER CANCEL and CLOCK pads for 3 seconds.
  • Demo ModePress and hold UPPER CANCEL and LESS (-) pads for 3 seconds.
  • Diagnostic Code DisplayEnter Quick Test Mode first (press and hold UPPER CANCEL and UPPER BROIL pads for 3 seconds within…
  • Diagnostic Code Display ModePress and hold the AUTOSET pad for 3 seconds at power-up (must be entered only when applying power…
  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H2 Control - MGR6875AD*)Press and hold the AUTOSET pad for 3 seconds at power-up
  • Diagnostic Code Display Mode (H3 Control - MGR6775AD*)Press and hold Upper Cancel and Timer for 3 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Engineering Test ModePress BAKE pad, enter 100°F using number pads, immediately push and hold BAKE pad for approximately…
  • Engineering Test Mode (H3 Control - MGR6775AD*)Press BAKE pad, enter 100°F using number pads, immediately push and hold BAKE pad for approximately…
  • Factory Default ResetPress and hold UPPER CANCEL and WARM pads for 3 seconds.
  • Faults Access (EOC III Controls)1
  • Lower Oven Temperature Adjustment1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Quick Test ModeWithin 5 minutes of power-up, press and hold UPPER CANCEL and UPPER BROIL pads simultaneously for 3…
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (ERC)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2 Control - MGR6875AD*)Press and hold Upper Cancel and Autoset pads for 3 seconds.
  • Quick Test Mode (H2 Control)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Control - MGR6775AD*)Press and hold Upper Cancel and Timer pads for 3 seconds within 5 minutes of power up.
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Sabbath ModeHold CLOCK pad for 5 seconds to activate Sabbath mode
  • Service Mode (EOC III Controls)1
  • Setup Options (Quick Test sub-mode)During Quick Test mode, press the 0 pad
  • Setup Options (within Quick Test Mode)While in Quick Test Mode, press the 0 pad
  • Temperature Display (F/C toggle)Press and hold UPPER CANCEL and UPPER BAKE pads for 3 seconds.
  • Test Mode1
  • Test Mode (H3 Control - MGR6775AD*)1
  • Test Mode (UH Controls)1
  • Upper Oven Temperature Adjustment1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass