mypros+
Model reference

Maytag MGS5752BDW

Range

9 documents36 error codes20 service modes

Available documentation

Service Manual

  • Service Manual - 1602629355 pg
    Covers this model
  • Service Manual - Gas Slide-In Range55 pg
    Covers this model
  • Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
    Covers this model
  • FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
    Covers this model

Bulletin

  • Installation Bulletin1 pg
    Covers this model
  • Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
    Covers this model

Installation Guide

  • Installation Instructions40 pg
    Covers this model
  • Installation Bulletin2 pg
    Covers this model

Other

  • TDC 0099 B1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MGS5752BDW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
1c1cShorted key1c2cKeyboard tail disconnected1c31Cancel key circuit problem1c32Cancel key circuit problem (H1 control, second cavity designation).1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway oven temperature (650°F) with door unlocked1d12Runaway oven temperature (650°F) with door unlocked (H1 control, second cavity).1d21Runaway oven temperature (950°F) with door locked1d22Runaway oven temperature (950°F) with door locked (H1 control, second cavity).3d11Oven temperature sensor open3d12Oven temperature sensor open (H1 control, second cavity).3d21Oven temperature sensor shorted3d22Oven temperature sensor shorted (H1 control, second cavity).3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch position failure4d12Door switch position failure (H1 control, second cavity).4d21No reverse airflow fan rotation detected (no or low RPM) during clean or cook…4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse airflow fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch circuit failure4d52Door switch circuit failure (H1 control, second cavity).
View all 36 error codes
9d11Door latch will not lock9d12Door latch will not lock (H1 control, second cavity).9d21Door latch will not unlock9d22Door latch will not unlock (H1 control, second cavity).9d31Latch state unknown9d32Latch state unknown, both locked and unlocked (H1 control, second cavity).

Service modes (20)

  • Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
  • Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
  • Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
  • Faults Access (EOC III Controls)1
  • H1 Diagnostic Code Display1
  • H1 Quick Test Mode1
  • M1 Diagnostic Code Display1
  • M1 Quick Test Mode1
  • M2 Diagnostic Code Display1
  • M2 Quick Test Mode1
  • One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
  • Quick Test Mode (EOC III Controls)1
  • Quick Test Mode (H1 Controls - Convection Model)1
  • Quick Test Mode (H1 Controls - Non-Convection Model)1
  • Quick Test Mode (H2/H2.5 Controls)1
  • Quick Test Mode (H3 Controls)1
  • Quick Test Mode (M1/M2 Controls)1
  • Quick Test Mode (NSC Non-Self Clean Controls)1
  • Service Mode (EOC III Controls)1
  • Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass