Maytag PER3524ACW

Available documentation

Error codes (36)

Service modes (38)

• 12-Hour Auto Shutoff DisableThe control automatically cancels all cooking and disables all relay exciters 12 hours after the…
• 12-Hour Shutoff Disable["The control automatically cancels all cooking and disables all relay drivers 12 hours after the…
• 12/24 Hour Clock Toggle["Press and hold Cancel and Delay simultaneously for 3 to 5 seconds.","Press More+ or Less- to…
• 24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More + or Less
• 24-Hour Clock TogglePress and hold Cancel and Delay simultaneously for 3-5 seconds
• Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
• Child Lockout["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
• Child Safety Lock["Press and hold Cancel and Cook & Hold simultaneously for 3 to 5 seconds until a beep sounds."]
• Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
• Clock Display Toggle (show/hide time)Press and hold Cancel and Clock simultaneously for 3-5 seconds.
• Default Configuration ResetPress and hold Cancel and Keep Warm simultaneously for 3-5 seconds until a beep sounds.
• Diagnostic Code Display["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
• Diagnostic Code Display Mode["Within 60 seconds of powering on the appliance, press and hold the More+ key.","Scroll through…
• Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
• Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
• Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
• Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
• Faults Access (EOC III Controls)1
• One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
• Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
• Oven Temperature Calibration Adjustment["Press Bake.","Enter 550 using the numeric keypad.","Immediately press and hold Bake for 3 to 5…
• Quick Test["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
• Quick Test Mode["Must be entered within the first 5 minutes after power up.","Press and hold Cancel and Broil pads…
• Quick Test Mode (EOC III Controls)1
• Quick Test Mode (Factory Test Mode)1. Must enter within first 5 minutes after power-on. 2. Press and hold Cancel and Broil…
• Quick Test Mode (H1 Controls - Convection Model)1
• Quick Test Mode (H1 Controls - Non-Convection Model)1
• Quick Test Mode (H2/H2.5 Controls)1
• Quick Test Mode (H3 Controls)1
• Quick Test Mode (M1/M2 Controls)1
• Quick Test Mode (NSC Non-Self Clean Controls)1
• Sabbath Mode["Initiate desired bake function before entering Sabbath mode.","Hold Clock button for 3 to 5…
• Service Mode (EOC III Controls)1
• Temperature Display (°C/°F toggle)["Press and hold Cancel and Bake simultaneously for 3 to 5 seconds.","Press More+ or Less- to…
• Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
• Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
• Test Mode (UH Controls)1
• Time Display Toggle["Press and hold Cancel and Clock simultaneously for 3 to 5 seconds."]

Full entry steps, exit procedures, and test sequences are available in Max.