Model reference

Maytag PER5720ACW

Name: Maytag PER5720ACW
Brand: Maytag

Range

13 documents36 error codes33 service modes

Available documentation

Tech Sheet

techsheet-16023481f-fr.pdf10 pg
Covers this model
Electric Freestanding Range ⎯ Technical Information8 pg
Covers this model

Service Manual

Service Manual - Freestanding Electric Range54 pg
Covers this model
Service Manual - Freestanding Electric Range54 pg
Covers this model
Freestanding Electric Range Service Manual54 pg
Covers this model
Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
Covers this model
FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
Covers this model

Bulletin

Technical Bulletin - TDC-0090-B-French Wiring replacement dual infinite switch1 pg
Covers this model
Technical Bulletin - TDC-0090-B Wiring replacement dual infinite switch1 pg
Covers this model
Technical Bulletin - TDC-0096-B-French Oven Door Handles Breaking2 pg
Covers this model
Technical Bulletin - TDC-0096-B Oven Door Handles Breaking2 pg
Covers this model

Service Flash

Technical Bulletin - TDC-0096-B Oven Door Handles Breaking_TDC-0096-B2 pg
Covers this model

Other

TDC 0096 B2 pg
Covers this model

MyPros+ Max

Diagnose your Maytag PER5720ACW.

Step-by-step diagnostics from the service manual
Test values, resistance specs, and wiring references
Verified part numbers when replacement is needed

Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

M+

M+ Max·Maytag Range

1c1c on my Maytag PER5720ACW

M+

Shorted key detected; disables audible

From Tech Sheet W18787522, p.14:

1.Access service mode to confirm the active fault code and read stored error history.

2.Measure control board supply voltage at test points. Expected: 12 VDC and 5 VDC.

3.Inspect all connectors on the main control for corrosion or backed-out pins.

Part WPW10804018

Electronic control board

Error codes (36)

CodeMeaning

1c1cShorted key detected; disables audible for affected key depression.1c2cKeyboard tail disconnected; keyboard loop reads improper value.1c31Cancel key circuit problem; cancel key reads improper value.1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error; no response from EEPROM after 3 tries.1c7cControl not calibrated; calibration value out of range 1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error; CRC invalid 1d11Runaway temperature (650°F) detected with door unlocked; sensor resistance…1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway temperature (950°F) detected with door locked; sensor resistance…1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Oven temperature sensor open; sensor resistance reads infinite ohms.3d12Temperature sensor failure (open) on lower oven cavity 3d21Oven temperature sensor shorted; sensor resistance reads 0 ohms.3d22Temperature sensor failure (short) on lower oven cavity 3d41Meat probe shorted 3d51Meat probe not calibrated 4d11Door switch not closed when door is locked; disables Clean and Lockout…4d12Door switch position failure 4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error 4d32Reverse Airflow Fan state error 4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch not open or closed (invalid state); turns off light and disables…4d52Door switch circuit failure

View all 36 error codes

9d11Latch will not lock; lock switch not closed when it should be locked 9d12Door latch will not lock on lower oven cavity 9d21Door latch will not unlock on upper/single oven cavity 9d22Door latch will not unlock on lower oven cavity 9d31Door latch both locked and unlocked simultaneously on upper/single oven 9d32Door latch both locked and unlocked simultaneously on lower oven

Service modes (33)

12-Hour Auto Shutoff Disable["Press Cancel and Keep Warm simultaneously for 3 to 5 seconds until a beep is heard."]
12/24 Hour Clock Toggle["Press Cancel and Delay simultaneously for 3 to 5 seconds.","Press More + or Less
24 Hour Clock TogglePress and hold Cancel and Delay pads for 3 to 5 seconds. Press More + or Less
Child Lock OutPress and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds.
Child Safety Lock["Press Cancel and Cook & Hold simultaneously for 3 to 5 seconds until a beep is heard."]
Clock Display TogglePress and hold Cancel and Clock pads for 3 to 5 seconds.
Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
Default Configuration Reset["Press Cancel and Keep Warm simultaneously for 3 to 5 seconds until a beep is heard."]
Diagnostic Code DisplayPress and hold More + pad within 60 seconds of powering up the unit. Cycle through codes using More…
Diagnostic Code Display Mode["Within 60 seconds of applying power to the control, press and hold the More + key.","Scroll…
Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
Factory Default ResetPress and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds.
Faults Access (EOC III Controls)1
One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
Oven Temperature Adjustment1. Press Bake pad. 2. Enter 550 on the digit pad. 3. Immediately press and hold Bake pad for 3 to 5…
Oven Temperature Calibration Adjustment["Press Bake.","Enter 550 using the number pad.","Immediately press and hold Bake for 3 to 5…
Quick Test1
Quick Test Mode["Must enter within the first 5 minutes after power is applied to the control.","Press and hold…
Quick Test Mode (EOC III Controls)1
Quick Test Mode (H1 Controls - Convection Model)1
Quick Test Mode (H1 Controls - Non-Convection Model)1
Quick Test Mode (H2/H2.5 Controls)1
Quick Test Mode (H3 Controls)1
Quick Test Mode (M1/M2 Controls)1
Quick Test Mode (NSC Non-Self Clean Controls)1
Sabbath ModeHold Clock button for 3 to 5 seconds to activate Sabbath mode
Service Mode (EOC III Controls)1
Temperature Display (°C/°F toggle)["Press Cancel and Bake simultaneously for 3 to 5 seconds.","Press More + or Less
Temperature Display (°F/°C toggle)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
Temperature Display Toggle (°F/°C)Press and hold Cancel and Bake pads for 3 to 5 seconds. Press More + or Less
Test Mode (UH Controls)1

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag range models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass