Model reference
Maytag PGR5720LDW
Range
6 documents36 error codes34 service modes
Available documentation
Tech Sheet
- Tech Sheet - 16023524F (FR)10 pg
- Cuisinière autoportante au gaz — Informations techniques10 pg
Service Manual
- maytag-freestandin63 pg
- Maytag Freestanding Gas Range Repair Service Manual63 pg
- Failure Codes and Wiring Diagrams for Maytag Heritage Gas & Electric Ranges124 pg
- FAILURE CODES AND WIRING DIAGRAMS for MAYTAG HERITAGE GAS & ELECTRIC RANGES124 pg
MyPros+ Max
Diagnose your Maytag PGR5720LDW.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (36)
CodeMeaning
1c1cShorted key detected on the control circuit board.1c2cKeyboard tail disconnected from the control board.1c31Cancel key circuit problem detected.1c32Cancel key circuit problem (cancel key improper value) on lower oven cavity.1c4cPower micro communication failure (CRC invalid).1c6cEEPROM error1c7cControl not calibrated1c81Cook profile corrupted in EEPROM for upper/single oven cavity (CRC invalid).1c82Cook profile corrupted in EEPROM for lower oven cavity (CRC invalid).1c8cCooking program error1d11Runaway oven temperature (650°F) with door unlocked.1d12Runaway temperature (650°F) detected with door unlocked on lower oven cavity.1d21Runaway oven temperature (950°F) with door locked.1d22Runaway temperature (950°F) detected with door locked on lower oven cavity.3d11Oven temperature sensor open (resistance greater than infinite ohms).3d12Temperature sensor failure (open) on lower oven cavity3d21Oven temperature sensor shorted (resistance near 0 ohms).3d22Temperature sensor failure (short) on lower oven cavity3d41Meat probe shorted3d51Meat probe not calibrated4d11Door switch not closed when door is locked.4d12Door switch position failure4d21No Reverse Airflow Fan rotation (no/low RPM) on upper/single oven cavity.4d22No Reverse Airflow Fan rotation (no/low RPM) on lower oven cavity.4d31Reverse Airflow Fan state error4d32Reverse Airflow Fan state error4d41High Reverse Airflow Fan rotation (high RPM) on upper/single oven cavity.4d42High Reverse Airflow Fan rotation (high RPM) on lower oven cavity.4d51Door switch not open or closed4d52Door switch circuit failureView all 36 error codes
9d11Door latch will not lock9d12Door latch will not lock on lower oven cavity9d21Door latch will not unlock on upper/single oven cavity9d22Door latch will not unlock on lower oven cavity9d31Door latch both locked and unlocked simultaneously on upper/single oven9d32Door latch both locked and unlocked simultaneously on lower oven
Service modes (34)
- 12/24 Hour Clock["Press and hold CANCEL and DELAY keys simultaneously for 3 to 5 seconds.","Press MORE+ or LESS- to…
- 24 Hour Clock Toggle["Press and hold Cancel and Delay pads for 3 to 5 seconds.","Press More + or Less
- 24-Hour Clock TogglePress and hold CANCEL and DELAY keys simultaneously for 3 to 5 seconds. Press MORE + or LESS
- Child Lock Out["Press and hold Cancel and Cook & Hold pads for 3 to 5 seconds until beep sounds."]
- Child Safety LockPress and hold CANCEL and COOK & HOLD keys simultaneously for 3 to 5 seconds until a beep sounds.
- Clock Display On/Off["Press and hold CANCEL and CLOCK keys simultaneously for 3 to 5 seconds."]
- Clock Display TogglePress and hold CANCEL and CLOCK keys simultaneously for 3 to 5 seconds to toggle time display…
- Clock Display Toggle (On/Off)["Press and hold Cancel and Clock pads for 3 to 5 seconds."]
- Default Configuration Reset["Press and hold CANCEL and KEEP WARM keys simultaneously for 3 to 5 seconds."]
- Diagnostic Code Display Mode["Must be started within 60 seconds of powering up the control.","Press and hold More + pad within…
- Diagnostic Code Display Mode (H1 Controls)Press and hold AUTOSET pad for 3 seconds at power-up.
- Diagnostic Code Display Mode (H3 Controls)Press and hold Upper Cancel and Timer for 3 to 5 seconds within 5 minutes of power up.
- Diagnostic Code Display Mode (NSC Controls)Press and hold the More + pad for 3 to 5 seconds when powering up the unit (within 60 seconds of…
- Factory Default Reset["Press and hold Cancel and Keep Warm pads for 3 to 5 seconds until beep sounds."]
- Faults Access (EOC III Controls)1
- One-Watt Standby Mode (NSC Controls)Press and hold Cancel and Less
- Oven Temperature Adjustment["Press Bake pad.","Enter 550 on the digit-pad.","Immediately press and hold Bake pad for 3 to 5…
- Oven Temperature Calibration["Press the BAKE key.","Use the numeric keypad to enter 550.","Immediately press and hold the BAKE…
- Quick Test Mode["Must be entered within first 5 minutes after power up.","Press and hold Cancel and Broil pads…
- Quick Test Mode (EOC III Controls)1
- Quick Test Mode (Factory Test Mode)["Press and hold CANCEL and BROIL keys simultaneously for 3 seconds.","Release both keys once the…
- Quick Test Mode (H1 Controls - Convection Model)1
- Quick Test Mode (H1 Controls - Non-Convection Model)1
- Quick Test Mode (H2/H2.5 Controls)1
- Quick Test Mode (H3 Controls)1
- Quick Test Mode (M1/M2 Controls)1
- Quick Test Mode (NSC Non-Self Clean Controls)1
- Sabbath Mode["Initiate desired bake function before entering Sabbath mode.","Hold Clock pad for 3 to 5 seconds…
- Service Mode (EOC III Controls)1
- Temperature Display (C/F toggle)Press and hold CANCEL and BAKE keys simultaneously for 3 to 5 seconds. Press MORE + or LESS
- Temperature Display (Celsius/Fahrenheit)["Press and hold CANCEL and BAKE keys simultaneously for 3 to 5 seconds.","Press MORE+ or LESS- to…
- Temperature Display Toggle (°F/°C)["Press and hold Cancel and Bake pads for 3 to 5 seconds.","Press More + or Less
- Test Mode (UH Controls)1
- Twelve Hour Shutoff
Full entry steps, exit procedures, and test sequences are available in Max.
Related Maytag range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass