mypros+
Model reference

Maytag MAH3000AK

Washer

39 documents8 error codes11 service modes

Available documentation

Service Manual

  • Washer Service Manual157 pg
    Covers this model
  • Maytag Neptune Mah3000 Washer Service Manual63 pg
    Covers this model

Bulletin

  • Service Bulletin - TS564 (Resolving Odor Complaints)2 pg
    Covers this model
  • Laundry Revised Machine Control Board2 pg
    Covers this model
  • Resolving Odor Complaints2 pg
    Covers this model
  • Bleach and Fabric Softener Dispenser2 pg
    Covers this model
  • Belts Falling Off1 pg
    Covers this model
  • Air Dome Hose Clip Eliminated1 pg
    Covers this model
  • Service Bulletin - TS592 (Door Difficult To Open)1 pg
    Covers this model
  • Pressure Switch Revised1 pg
    Covers this model
  • Bolt Torque Specifications1 pg
    Covers this model
  • Service Bulletin - TS590 (New Boot Clamp Wire)1 pg
    Covers this model
  • Airdome Hose Retainer1 pg
    Covers this model
  • Capacitors Added to 4-Coil Water Valve1 pg
    Covers this model
  • Service Bulletin - TS576 (New Lower Front Weight Switch and Bracket)1 pg
    Covers this model
  • New Cabinet Assembly1 pg
    Covers this model
  • Color-Coded Inlet Hoses1 pg
    Covers this model
  • New Boot Clamp Wire1 pg
    Covers this model
  • Door Difficult To Open1 pg
    Covers this model
  • Water In Dispenser Cup1 pg
    Covers this model
  • Service Bulletin - TS561 (Belts Falling Off)1 pg
    Covers this model
  • Service Bulletin - TS572 (Vented Door Liner)1 pg
    Covers this model
  • Service Bulletin - TS557 (Belt Replacement)1 pg
    Covers this model
  • Service Bulletin - TS635 (New Machine Control Board - HNP106)2 pg
    Covers this model
  • Service Bulletin - TS602 (Corrugated Drain Hose)1 pg
    Covers this model
  • Door Boot Gasket - Revised1 pg
    Covers this model
  • Technical Bulletin - Maytag Neptune Burnt Resistors2 pg
    Covers this model
  • New Lip Seal Assembly and Shaft Sleeve1 pg
    Covers this model
  • Stops in Mid-Cycle3 pg
    Covers this model
  • Technical Bulletin - New universal motor/motor control conversion kit1 pg
    Covers this model
  • Technical Bulletin - Motor Drive System Neutral Feed Issue1 pg
    Covers this model

Service Flash

  • RT26141 Software enhancement5 pg
    Covers this model
  • Washer Stops In Mid Cycle and or Flashes A Code1 pg
    Covers this model

Training

  • Spring and Cable Removal2 pg
    Covers this model

Job Aid

  • Maytag Services Training Bulletin - Neptune Washers - Spring and Cable Removal2 pg
    Covers this model

Other

  • TS5392 pg
    Covers this model
  • TS5571 pg
    Covers this model
  • TS6031 pg
    Covers this model
  • TCL 0015B B1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MAH3000AK.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Service modes (11)

  • Advertising Mode (LCD Washer)Press and hold the Favorites and Back keys for 3 seconds.
  • Advertising Mode (LED Washer)Press and hold the Heavy Soil and Cotton/Sturdy keys for 3 seconds.
  • Board Input Test (LED Washer)While in Service Mode, press the Hand Wash key.
  • Board Output Test (LED Washer)While in Service Mode, press the Rinse key.
  • Motor & Motor Control Test["Disconnect power to the machine.","Inspect the motor to motor control wire harness for integrity…
  • Motor Phase Test["Disconnect power to the machine.","Inspect the motor to motor control wire harness for integrity…
  • Quick Service Cycle (LED Washer)While in Service Mode, press the Delicates key.
  • Quick Spin Test (LED Washer)While in Service Mode, press the Spin key.
  • Service Mode (LCD Washer - MAH7500)Press and hold the Back and Help keys simultaneously for 5 seconds.
  • Service Mode (LED Washer - MAH5500B)Press and hold the Delicates and Heavy Soil keys simultaneously for 3 seconds.
  • Tachometer Circuit Diagnostics["Inspect the motor control wire harness for integrity of connections on both ends

Full entry steps, exit procedures, and test sequences are available in Max.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass