mypros+
Model reference

Maytag MAH5500AWW

Washer

18 documents9 error codes22 service modes

Available documentation

Tech Sheet

  • Neptune Front Load Washer Technical Information14 pg
    Covers this model

Service Manual

  • New Century Neptune Washer Service Manual Supplement52 pg
    Covers this model

Bulletin

  • Technical Bulletin1 pg
    Covers this model
  • Technical Bulletin - ITDL-0026-B Bleach Vapors1 pg
    Covers this model
  • Technical Bulletin - ITDL-0026-B Bleach Vapors1 pg
    Covers this model
  • Technical Bulletin - Bleach Vapors1 pg
    Covers this model
  • Technical Bulletin - TDL-0052A-B Failed resistor on control board2 pg
    Covers this model
  • Technical Bulletin - TDL-0051A-B Door boot wrinkles2 pg
    Covers this model
  • Technical Bulletin - Door boot wrinkles2 pg
    Covers this model
  • Technical Bulletin - Neptune Door adjustment2 pg
    Covers this model
  • Technical Bulletin - Maytag Neptune Burnt Resistors2 pg
    Covers this model
  • Cabinet and Baseframe Revision1 pg
    Covers this model
  • Stops in Mid-Cycle3 pg
    Covers this model
  • Technical Bulletin - Improved Lip Seal2 pg
    Covers this model
  • Technical Bulletin1 pg
    Covers this model
  • TechnicalBulletin-TDL-0044B-B1 pg
    Covers this model
  • Technical Bulletin - Motor Drive System Neutral Feed Issue1 pg
    Covers this model

Other

  • TCL 0015B B1 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MAH5500AWW.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (9)

CodeMeaning
doDoor is open; the door of the machine is open.FLFailed to lock; the machine has repeatedly tried to lock the door but cannot.LODoor is locked (failed to unlock); the machine has repeatedly tried to unlock…LrLocked rotor; the machine has repeatedly tried to turn the motor but cannot.ndNo drain; the machine has tried to drain but cannot.nFNo fill; the machine has tried to fill but cannot.odThe door has not been opened since the end of the last cycle; as a safety check…PFPower failure; power to the machine has been lost during the last cycle.sdSuds detected

Service modes (22)

  • Advertising Mode (LCD Washer - MAH7500A)Press and hold the Favorites and Back keys simultaneously for 3 seconds.
  • Advertising Mode (LED Washer - MAH5500B)Press and hold the Heavy Soil and Cotton/Sturdy keys simultaneously for 3 seconds.
  • Board Input TestWhile in Service Mode, press the Hand Wash key.
  • Board Input Test (LED Washer)Enter Service Mode, then press the Hand Wash key.
  • Board Output TestWhile in Service Mode, press the Rinse key.
  • Board Output Test (LED Washer)Enter Service Mode, then press the Rinse key.
  • Diagnostic Codes ViewingWhile in Service Mode, press the Presoak key
  • Fast Time Down TestWhile in Service Mode, press the Quick key.
  • Membrane Pad CheckWhile in Service Mode, press the Wrinkle Free key.
  • Membrane Pad Check (LED Washer)Enter Service Mode, then press the Wrinkle Free key.
  • Motor Control Board Output Test1) Disconnect power
  • Quick Service CycleWhile in Service Mode, press the Delicates key.
  • Quick Service Cycle (LED Washer)Enter Service Mode, then press the Delicates key.
  • Quick Spin TestWhile in Service Mode, press the Spin key.
  • Quick Spin Test (LCD Washer)Enter Service Mode, select Service Tests, then select Quick Spin Test and press start quick spin…
  • Quick Spin Test (LED Washer)Enter Service Mode, then press the Spin key.
  • Service ModePress and hold the Delicates and Heavy Soil keys simultaneously for 3 seconds.
  • Service Mode (LCD Washer - MAH7500A)Press and hold the Back and Help keys simultaneously for 5 seconds.
  • Service Mode (LED Washer - MAH5500B)Press and hold the Delicates and Heavy Soil keys simultaneously for 3 seconds.
  • Software Revision Number DisplayWhile in Service Mode, press the Light Soil key.
  • System Check (LCD Washer)Enter Service Mode, select Service Tests, then select System Check.
  • User Interface Test (LCD Washer)Enter Service Mode, select Service Tests, then select User Interface Test.

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass