mypros+
Model reference

Maytag MYR30

Washer

2 documents36 error codes6 service modes

Available documentation

Service Manual

  • Service Manual - Maytag Commercial Multi Load Washer88 pg
    Covers this model

Installation Guide

  • Installation Instructions Commercial Washer-extractor28 pg
    Covers this model
MyPros+ Max

Diagnose your Maytag MYR30.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass

Error codes (36)

CodeMeaning
D-05Coin 1 chute is blocked.D-13Coin 2 chute is blocked.D-16Card reader error detected.F-03Pressure sensor error.F-11Motor error or motor communication error with the inverter.F-13Tilt switch is open.F-14High speed tilt switch activation.F-20Slow fill detected during water fill.F-21Slow drain detected.F-22Door lock error; not detecting door locking.F-24Temperature sensor failure.F-25Speed sensor error.F-26Door switch error; not detecting door open/close.F-27Over fill condition detected.F-28WiFi error.F-29Door unlock error; not detecting door unlocking.F-32Washer is not filling with water.F-70Communication error between UI and ACU.F-71Communication error between UI and ACU.F-74EEPROM error.T-01Heating error.T-02Slow heating detected.T-03Over heating condition detected.T-04Configuration mismatch between UI and ACU.T-05State mismatch between UI and ACU status.T-06Load too hot; waiting for safe temperature to unlock door.T-07No default cycle has been selected.T-09Door is open.T-10Cycle advance function is disabled.T-11Invalid cycle data.
View all 36 error codes
T-12USB memory stick not detected.T-15Tilt switch cycle failure.T-17Critical error with multiple sub-error codes indicating micro faults, software…T-18Fill dispenser error.T-19Water temperature error.T-20Water temperature error.

Service modes (6)

  • Diagnostic Cycle (Factory Diagnostic Test)["Enter Diagnostic Mode via Service Menu.","Select Diagnostic Cycle.","Ensure the door is…
  • Fault Recordings["Enter Diagnostic Mode via Service Menu.","Select Fault Recordings menu."]
  • HMI/UI Tests["Enter Diagnostic Mode via Service Menu.","Select HMI/UI Tests menu."]
  • Main Control Tests (Manual Component Testing)["Enter Diagnostic Mode via Service Menu.","Select Main Control Tests menu.","Toggle to the…
  • Service Menu / Diagnostic Mode (OPL)["Press the Service Mode button on the OPL controls to enter the Service Menu.","Scroll down to…
  • Service Menu / Diagnostic Mode (Vended)["Toggle the Service Key (located under the top edge of the control panel, actuated by the left…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Maytag washer models

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass