mypros+
Model reference

Samsung DV448AGWXAA

Dryer

7 documents8 error codes13 service modes

Available documentation

Service Manual

  • Samsung Clothes Dryer Service Manual - DV448AGP/XAA81 pg
    Covers this model
  • Service Clothes Dryer130 pg
    Covers this model
  • Samsung Dryer DV5451 DV5471 DV448AEP Service Manual66 pg
    Covers this model

Bulletin

  • Samsung DryerDV520AEP XAA Dryer belt slides off the pulley when manually rotated counter clockwise8 pg
    Covers this model
  • Service Bulletin8 pg
    Covers this model
  • SERVICE BULLETIN - Dryer belt slides off the pulley when manually rotated counter-clock wise (ccw)8 pg
    Covers this model

Training

  • Volume 5, Issue 11 Home Appliances Newsletter - November 201111 pg
    Covers this model
MyPros+ Max

Diagnose your Samsung DV448AGWXAA.

  • Step-by-step diagnostics from the service manual
  • Test values, resistance specs, and wiring references
  • Verified part numbers when replacement is needed
Start diagnosing

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax

Error codes (8)

CodeMeaning
3Door switch errorbE2Unit detects a button is being pressed for over 30 seconds or a button is stuck.dEDoor is not closing properly; dryer running with door open.dFDoor is not closing properly; dryer running with door open.EtCheck the heater thermistor; for gas models, check that gas is supplied…FEInvalid power source frequency detected.hEEEPROM is not communicating properly.tEInvalid heating temperature detected, possibly caused by clogged lint screen or…

Service modes (13)

  • Continuous Run Mode1
  • continuous_run_mode["Ensure dryer is powered on in normal user mode.","Press Signal + Dry Level buttons simultaneously…
  • Cycle Count ModeWhile in Service Mode, press the Wrinkle Prevent button.
  • cycle_count_mode["Enter Special Test Mode (Service Mode) first.","While in Service Mode, press the Signal button…
  • Data Display ModeWith Power On, press and hold AdjustUp + AdjustDown keys for 7 seconds until a beeping sound is…
  • Sensor Bar Touch Data ModeWith Power On, press and hold Wrinkle Prevent and Temp keys for 3 seconds
  • Service Mode1
  • Service Mode (Sensor Bar Touch Data - Default)1
  • Software Version ModeWhile in Service Mode, press Temp until a beeping sound is heard. Example
  • software_version_mode["Enter Special Test Mode (Service Mode) first.","While in Service Mode, press the Temp button…
  • special_test_mode["Ensure the dryer is powered on.","Press Signal and Temp buttons simultaneously for 3 seconds, or…
  • System Check Mode (t2 mode)While in Power Off, press and hold Dry Level + Power keys simultaneously. Display shows 't2'…
  • system_check_mode["Ensure dryer is powered off (normal user mode).","Press Dry Level + Power buttons…

Full entry steps, exit procedures, and test sequences are available in Max.

Related Samsung dryer models

75,000+ service documents · 20,000+ error codes · 100+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass · Plus applicable tax