Model reference
Samsung NE58K9852WG
Range
2 documents19 error codes4 service modes
Available documentation
Service Manual
- Samsung NE58K9850WG Range Service Manual57 pg
- Slide In Range / Free Standing Range Service Manual55 pg
MyPros+ Max
Diagnose your Samsung NE58K9852WG.
- Step-by-step diagnostics from the service manual
- Test values, resistance specs, and wiring references
- Verified part numbers when replacement is needed
Start diagnosing
$29/month · Cancel anytime · Or $9.95 3-day pass
Error codes (19)
CodeMeaning
-dC-Partition is inserted or removed while the oven is operating.-SE-Key short-tE-Sub PCB communication error between Sub PCB and Touch glass.C-20The oven sensor is open or short when the oven is operating.C-21Internal temperature rises abnormally high.C-23The temp probe sensor is short when oven is operating.C-30The PCB temp sensor is open or short when the oven is operating.C-31PCB temperature rises abnormally high.C-d0Key short detected on the keypad.C-d1Door lock is mispositioned.C-F0Communication between the Main and Sub PCB is interrupted.C-F2Communication between the Main and Touch PCB is interrupted.E-08Oven fails to reach 100°F (38°C) within 10 minutes from room temperatureE-0EDoor locking errorE-21Oven sensor opened (over 100KΩ).E-22Oven sensor shorted (under 100Ω).E-24Oven heating overE-2EProbe shortE-83Main PCB communication error between Main PCB and Sub PCB.Service modes (4)
- Check Code (Stored Error Code Retrieval)["Touch 'Clock' key","Touch number '0' key","Touch 'START SET' key","Touch 'Clock' and 'Touch to…
- Door Lock Test["Press cooking time button and delay start keypad at the same time for 3 seconds to check whether…
- Error Code Display / Diagnostic Mode["1. Touch 'Clock' key","2. Touch number '3' key","3. Touch 'Oven Start / Set' key","4. Touch…
- Wi-Fi Diagnostic Info Display["Press 'Keep Warm' and 'Num 8' at the same time","Display will show AP-SSID name, main PCB…
Full entry steps, exit procedures, and test sequences are available in Max.
Related Samsung range models
78,000+ service manuals · 160,000+ error codes · 55+ brands
Get Started$29/month · Cancel anytime · Or $9.95 3-day pass