Electrolux Cooktop Error Code 35

Error code 35 on an Electrolux cooktop indicates an improper power supply condition, typically low voltage, or a problem with the jumper connections on the control board. The cooktop's control system monitors incoming voltage and board configuration, and triggers this code when something is outside the expected range. A blown fuse can also produce this fault. Diagnosis involves checking the supply voltage, jumper positions, and fuse continuity.

No, you should not continue using the cooktop while this error is active. Low voltage conditions can cause the cooktop to operate unpredictably or damage internal components, including the control board. Power the unit off at the breaker until the cause of the fault is identified and corrected.

Repair costs vary depending on the root cause. If the fix involves correcting a tripped breaker, repositioning a jumper, or replacing a fuse, costs are typically low, ranging from roughly $50 to $150 for a service call. If the control board has been damaged by the low voltage condition and requires replacement, costs can range from $200 to $500 or more depending on the specific board and labor rates in your area.

Some steps, such as checking whether a circuit breaker has tripped or is supplying weak voltage, are accessible to a careful DIYer. However, inspecting and repositioning jumpers on the control board and testing fuses requires opening the appliance and working near live electrical components, which carries real safety risk. If you are not comfortable working with high-voltage appliance wiring, a qualified technician should perform the diagnosis.

A reset, such as cutting power at the breaker for several minutes and restoring it, may temporarily clear the display. However, if the underlying cause such as low supply voltage, an incorrect jumper, or a blown fuse is not corrected, the error code will return. A reset alone is not a repair and should only be used to confirm whether a condition is persistent.