Electrolux Cooktop Error Code E065

E065 means the temperature sensor for the right front induction burner has detected an overtemperature condition. The cooktop triggers this code to protect the inductor coil and power electronics from heat damage. It is most commonly related to ventilation problems or a failing cooling fan, though the sensor itself can also be the source of the fault.

You should not continue using the right front burner while E065 is active. The code indicates the zone has exceeded safe operating temperatures, and continued use risks damaging the inductor coil, inverter components, or surrounding cabinetry. Allow the unit to cool completely and address the underlying cause before resuming normal use.

Repair costs vary depending on the faulty component. A replacement cooling fan typically runs in the range of $30 to $80 for the part, while an NTC temperature sensor is generally $15 to $50. If the control board requires replacement, parts alone can range from $150 to $350 or more. Adding professional labor typically brings total repair costs to somewhere between $100 and $500 depending on the diagnosis.

Some causes of E065 are DIY-friendly, particularly checking and clearing blocked vents and confirming adequate cabinet clearances around the cooktop. If the fault points to a failing cooling fan or temperature sensor, a confident DIYer comfortable working with appliance electronics can often replace these components. Control board replacement is more complex and may warrant professional service.

Powering off the cooktop at the breaker and allowing it to cool fully may temporarily clear E065, but the code will return if the root cause is not resolved. A reset is useful as a first step to confirm whether the fault is a one-time thermal event or a persistent problem. If E065 returns quickly after reset, a component failure such as a faulty fan or sensor is likely.