Electrolux Dishwasher Error Code Loc

Loc on an Electrolux dishwasher means the Child Lock feature is active. This disables all control panel buttons except AIR DRY, preventing any new cycle selections or changes. It is a safety status indicator, not a fault code. No repair is needed to clear it.

No, the Loc code is not a safety concern. It indicates the Child Lock feature is on, which is a built-in function designed to protect against accidental button presses. The dishwasher will continue running its current cycle normally even while Child Lock is active.

In nearly all cases, the Loc code costs nothing to fix because it is cleared by pressing and holding the AIR DRY button for 3 seconds. No parts or service call are required. If the touchpad is malfunctioning and repeatedly triggering Child Lock on its own, control panel replacement costs can range from roughly 80 to 200 dollars depending on the specific model and labor rates in your area.

Press and hold the AIR DRY touchpad for 3 seconds. The Loc indicator should disappear and the control panel will return to full operation. If the code does not clear after holding AIR DRY for 3 seconds, try powering the dishwasher off at the circuit breaker for 1 minute and then repeat the unlock procedure.

A power reset alone may or may not clear the Child Lock, depending on how the control board retains the lock state. The correct method is to press and hold the AIR DRY touchpad for 3 seconds. If a power reset is attempted first, the Loc code may still appear when power is restored, and the AIR DRY unlock procedure will still be required.