mypros+
Error code reference

Frigidaire Cooktop Error Code E73

Improper voltage output from filter board in the 3 cook zone induction module (same as E33).

Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the E73 error code actually means

Your Frigidaire induction cooktop has detected a problem with the electrical output from a circuit board that controls three of the cooking zones. This usually means there is a loose connection or a faulty component inside the cooktop that needs to be inspected or replaced. Until the issue is resolved, the affected cooking zones may not operate.

Diagnostic procedure

The full E73 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
First diagnostic step
Test all cables and connections on filter circuit board in the 3 zones induction module.
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock E73 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of E73

Ranked by how often they cause this code
  1. 1Loose or disconnected cables on the filter board
  2. 2Corroded or damaged connector pins
  3. 3Failed filter circuit board
  4. 4Damaged wiring harness
  5. 5Faulty 3-zone induction module

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about E73

What does E73 mean on a Frigidaire cooktop?
E73 indicates an improper voltage output from the filter circuit board inside the 3-cook-zone induction module. This code is functionally the same as E33 and points to a fault within the induction power filtering system. The cooktop has detected that the filter board's voltage output is outside the expected operating range. This can be caused by loose connections, a damaged wiring harness, or a failed filter board.
Is it safe to use my cooktop while E73 is displayed?
No, you should not continue using the cooktop while E73 is active. The error indicates a fault in the induction power circuitry, which means the affected cooking zones may not function correctly or at all. Operating the cooktop with a known electrical fault in the induction module could worsen the damage or create a safety hazard.
How much does it cost to repair an E73 error on a Frigidaire cooktop?
Repair costs vary depending on what component has failed. If the issue is simply a loose connector, cost may be limited to a service call fee, typically in the range of $75 to $150. Replacing a filter circuit board or induction module will add parts costs, which can range from $150 to $400 or more depending on the specific model and parts availability. Labor charges will increase the total if a technician performs the repair.
Can I fix E73 on my Frigidaire cooktop myself?
A knowledgeable DIYer can start by checking all cable connections on the filter circuit board in the 3-zone induction module, which is the first recommended diagnostic step. However, accessing the induction module requires disassembling the cooktop, and working near induction power components carries a serious shock risk. If the issue goes beyond a loose connection and involves a failed board or wiring harness, professional repair is strongly recommended.
Will resetting the cooktop clear the E73 error?
A reset may temporarily clear the error code display, but if the underlying fault with the filter board or its connections has not been corrected, the E73 code will return once the cooktop attempts to operate. A reset alone is not a fix. The filter board connections and wiring must be inspected and any defective components must be replaced before the code will clear permanently.

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass