Frigidaire Cooktop Error Code E95

E95 means the 2 cook zones induction module has detected that the AC input voltage is too low to operate safely. The cooktop disables itself to protect the inverter and power electronics from damage caused by undervoltage conditions. The first diagnostic step is to measure the actual supply voltage at the cooktop's input terminals using a multimeter.

No. The cooktop disables cooking operation when E95 is active precisely because running the induction module under low voltage can cause overheating and component damage. Do not attempt to bypass or ignore the error. Resolve the underlying voltage issue before resuming use.

Repair costs vary depending on the cause. If the issue is a loose connection or a circuit correction with no parts needed, costs may be limited to a service call fee, typically in the range of $75 to $150. If the circuit breaker needs replacement, parts and labor could range from $150 to $300. If the 2 cook zones induction module itself requires replacement, total repair costs including parts and labor can range from $250 to $500 or more depending on the specific model and part availability.

Some causes of E95, such as an overloaded circuit or a shared circuit issue, can be addressed without a technician. However, measuring voltage at the terminal block, inspecting wiring connections, or replacing a circuit breaker involves working with high-voltage wiring and should only be done by someone comfortable with electrical safety procedures. If the induction module itself has failed, a qualified technician should handle the replacement.

A reset may temporarily clear the displayed error, but if the underlying voltage problem has not been corrected, E95 will return as soon as the module attempts to operate again. Clearing the code without addressing the root cause does not protect the appliance and is not a permanent solution.