mypros+
Error code reference

GE Refrigerator Error Code 0107

Refrigerator (FF) fan feedback present when fan is off.

GE codesGE refrigerator codes
Avg. service call
$285
National average. Trip fee plus diagnostic plus labor. Before parts.
MyPros+ 3-day pass
$9.95
Same diagnostic steps, on your phone. Start now.
You keep in your pocket
~$275
Even before you buy the part.
Skip the service call. Fix it yourself.
Full procedure unlocks instantly.
Get Started

What the 0107 error code actually means

Your refrigerator's control board has detected that the fan inside the fresh food section is sending a signal saying it's running, even though the control board told it to turn off. This is usually caused by an electrical problem in the fan's wiring or circuit, not a broken fan. A technician will need to inspect the fan wiring and related components to find and fix the faulty connection.

Diagnostic procedure

The full 0107 procedure

Step 1 is visible so you can confirm you are on the right page. The remaining steps, the ones that tell you whether to actually replace a part, unlock with any pass.

MyPros+ · DiagnosticsStep 1 preview
1
Confirm the fault
Power cycle the unit: switch off the breaker for 60 seconds, then restore power. If the code returns, the fault is persistent and the procedure below isolates the cause.
Unlock with pass
Unlock with pass
Unlock with pass
More steps, wiring diagram references, and verified part numbers
Includes expected resistance and voltage values, connector pinouts, and supersession notes for replacement parts.
Unlock 0107 procedure $9.95

Or subscribe: $29/month for unlimited access to all codes plus Max AI diagnostics.

Most common causes of 0107

Ranked by how often they cause this code
  1. 1Shorted FF fan wiring harness
  2. 2Faulty FF fan motor
  3. 3Failed control board
  4. 4Loose or corroded fan connector

Most DIYers save hundreds by diagnosing before ordering parts.

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass

Questions people ask about 0107

What does error code 0107 mean on a GE refrigerator?
Code 0107 means the control board is detecting a feedback signal from the fresh food (FF) fan while the fan is commanded off. Normally this feedback line goes silent when the fan stops. When it stays active, the board logs 0107 to flag the unexpected electrical activity. This points to a wiring, fan motor, or control board issue rather than a simple fan failure.
Can I still use my GE refrigerator with error code 0107 active?
The refrigerator will likely continue running with 0107 active, but the control board may not manage the fresh food fan cycle correctly since it cannot trust the fan's status. This can cause uneven temperatures or reduced cooling in the fresh food compartment. Perishables could be affected if the issue progresses, so the fault should be diagnosed and repaired promptly rather than left unresolved.
Is error code 0107 on a GE refrigerator a serious problem?
It is not an immediate emergency, but it is not a code to ignore. The 0107 fault indicates an active electrical anomaly in the fresh food fan circuit, and leaving it unresolved can lead to cooling inconsistencies or potentially mask a developing wiring issue. Checking the harness and fan motor first will often resolve it quickly, and neither repair requires specialized tools beyond basic hand tools and a multimeter.
How do I fix error code 0107 on a GE refrigerator?
Start by inspecting the wiring harness that runs to the fresh food fan for any pinched, shorted, or damaged wires and clean or reseat the connectors. If the harness looks good, test the FF fan motor and replace it if it is generating signal when unpowered. If both check out, the main control board may need replacement. These steps should be performed with the refrigerator unplugged for safety.
How much does it cost to repair GE refrigerator error code 0107?
If the fix is a wiring harness repair or connector cleaning, costs are minimal, mostly labor time. A replacement FF fan motor typically runs $25 to $75 for the part. A main control board is the most expensive scenario, usually $100 to $250 for the part alone. Professional labor adds $100 to $200 depending on your area. If you are comfortable with basic appliance disassembly and using a multimeter, this is a DIY-friendly diagnosis.

Related GE refrigerator error codes

All GE refrigerator codes

78,000+ service manuals · 160,000+ error codes · 55+ brands

Get Started

$29/month · Cancel anytime · Or $9.95 3-day pass